Speaking of ehthernet I am writing an ethernet driver for smsq/e. Is there anyoneelse doing the same ? :)
/Michael In message <[EMAIL PROTECTED]> you wrote: > > Hi Phoebus, > > >In 10 minutes I'll be the proud owner of a Q40 (Yipeeeee!!! :-) > > Finally you have made it :-) Congratulations! > > >which begs the question.... anyone knows of a 10BaseT > >Ethernet ISA adapter that works with it? I don't want to get a > >10Base2 one and then have to find a Twisted Pair converter > >for the coaxial..... > > Basically, most jumperable NE2000 compatible ISA Cards should do. For > example the Longshine LCS-8634PTB. Beware a few newer LCS-8634PTB have a > hardware bug and create IRQ10/11 signals, even if configured to IRQ5 so > these lines mut be cut. > > Some non-jumperable card can also be configured in a non-volatile manner by > running a configuration software on a DOS box. > > Set IO base to 0x300 and IRQ to 5. > > If you want to be on the safe side, get a card from D&D Systems :-) > > >Also, does anybody have info on how the QXL talks to the ISA > >bus? > > SH and TT I guess. > > >It would be interesting (to say the least) to put the QXL > >there and use it together with the Q40 ;-)))) > > You could use the QXL to provide the good old QL network :-) > > All the best > Peter >
