I presume there are only 2 ways of changing the kbd; either I set in Configuration QPC2 page, the "CODE de Pays" as 1 or 33 or 44 etc. and I set QBD_TABLE in my boot as the same chosen number. I do not know of any other way of affecting the keyboard.
My keyboard is in English, i.e.the Keys are in English. I have tried 1 and 33 and 44 even 49 as mentioned above and do not get success. I wonder why my Configueration page of QPC2 is in French. Perhaps I should get it in English. But how? >-- Message original -- >To: [EMAIL PROTECTED] >Subject: Re: [ql-users] QPC Keyboard >Date: Fri, 14 Jan 2005 16:31:12 -0000 >From: "Rich Mellor" <[EMAIL PROTECTED]> >Cc: >Reply-To: [EMAIL PROTECTED] > > >On Fri, 14 Jan 2005 17:22:31 +0100, <[EMAIL PROTECTED]> wrote: > >> I have managed to configure smsqe.bin by using Cueshell so I can choose > >> the >> language. I have also tried out Code du Pays in the Configuration window >> of QPC starting window. But I have not solved my problem. > >Ian, > >I presume that you reset QPC2 after altering the configuration of >smsqe.bin and the smsqe.bin you configured was on the PC not within the QL > >hard disk :-) > >Otherwise, can you please recap. I presume you are using a French >keyboard and your Windows is set up for French. So you now need QPC2 to be > >set up for a french keyboard?? > >If you have an English keyboard but are using a French setup of Windows, > >this might explain some of the problem. > > > >-- >Rich Mellor >RWAP Services >26 Oak Road, Shelfield, Walsall, West Midlands WS4 1RQ > >http://www.rwapservices.co.uk/ >_______________________________________________ >QL-Users Mailing List >http://www.q-v-d.demon.co.uk/smsqe.htm _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm