On Wed, Jun 05, 2002 at 10:14:46AM +0100, P Witte wrote:
> I can confirm that the Kodak DC210 works with SNG's software via serial > cable on the Q60 w SMSQ/E, but this is a rather old camera and can only be > purchased secondhand - so perhaps not much help. Besides serial transfer is > incredibly slow. If there were ATA drivers (which is the interface this > camera > uses) or other means of transferring data from CF disks, using the CF disk > drives available for the Q60, that would be a real treat! Beware however, > not all CF media are equally readable from these drives in my experiance. > Dont know if the problems Ive encountered relate to the drives, the media, > the cables, the Q60 or any combination of these. This needs sorting out. I don't expect it to work from SMSQ because of the byteorder problem, on Linux it should work with the 'hdX=swapdata' kernel arg. Richard