In case it's any use to anyone while on this subject, QL Today printed an article about connecting QLs to SCART socketed TVs. It was in QL Today Vol 4 Issue 3 (Sept 99) page 44, by Richard Cooke.
-- Dilwyn Jones [EMAIL PROTECTED] http://www.soft.net.uk/dj/index.html ----- Original Message ----- From: "Tony Firshman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: 11 July 2002 00:00 Subject: Re: [ql-users] Monitor connections > > On Wed, 10 Jul 2002 at 23:01:38, Robert Newson wrote: > (ref: <[EMAIL PROTECTED]>) > > > >>> Anyone care to hazard a guess as to which is right? Anyway, > >>> pin 5 won't have a signal if QL World is right. > >> QL Manual 12/84 concepts is the right one - which I assume was the > >>one quoted from QLW (snipped). > > > > > >My QL manual concepts section (12/84 - Pg 33) has: > > > > 1 - PAL > > 3 - VIDEO > > 4 - CSYNC > > 5 - VSYNC > > > Yep that is the right one. > >My QL World May 87, Pg 25 has: > > > > 1 - VIDEO > > 3 - PAL > > 4 - CSYNC > > 5 - N/C > > > Wrong > >My QL Service Manual has on the Circuit Diagram (both Issue 5 & 6): > > > > 1 - VIDEO > > 3 - PAL > > 4 - VSYNCH > > 5 - CSYNCL > Wrong > > > >and in Appendix A: > > > > 1 - PAL > > 3 - VIDEO > > 4 - CSYNC > > 5 - VSYNC > Right > > >What are the corrections - can u let me know please? > > > Well the monitor (of course) > > -12v mods to 8302 not on pcb > Some HAL connections missing (issue 6) > clock not adjustable (issue 6) > UHF out on modulator > > and I have labelled quite a bit, and put some other comments. > > > > -- > QBBS (QL fido BBS 2:252/67) +44(0)1442-828255 > tony@<surname>.demon.co.uk http://www.firshman.demon.co.uk > Voice: +44(0)1442-828254 Fax: +44(0)1442-828255 > TF Services, 29 Longfield Road, TRING, Herts, HP23 4DG >
