On Mon, 22 Sep 2003 11:20:36 EDT, <[EMAIL PROTECTED]> wrote:
In a message dated 20/09/03 18:38:37 GMT Daylight Time, [EMAIL PROTECTED] writes:
Michael Grunditz writes:
> I cant use sernet between my q40 and qpc2. Iget > sernet aborted . > > any help ?
Yes. Transfer data using some other method. Eg use a CD instead.
Per
Might be quicker to print out what is to be transferred from one end and type it in at the other.
Or use handwriting for the output end.
(I have NEVER been able to get sernet to work ANYWHERE.)
George
It's a matter of cabling actually usually. However as Jochen said in that Sernet Special on QLT and I quote: "It DOES work"
I have been using SERNET with: QPC to Aurora, QPC to Q40, Q40 to Aurora even QemuLator to Aurora and QXL...
If you are using QDOS Classic however it WILL NOT work. You need the H.P.R's SimSer to emulate SMSQ/E's ports.
Phoebus
--
Visit the QL-FAQ at: <http://www.dokos-gr.net/ql/faq/> (Still uploading stuff!)
Visit the uQLX-win32 homepage at: <http://www.dokos-gr.net/ql/uqlx.html>
Visit the uQLX-mac home page at:<http://www.dokos-gr.net/ql/uqlxmac.html>
