Ok...Just to wrap this thread up on this list, in case anyone searches this list....
The issue is apparently a known issue without an elegant solution currently. We pretty much nailed it down though on here... You can find Sam's response and description of the issue in the thread here: http://www.mail-archive.com/spamdyke-users@spamdyke.org/msg03033.html with a reference to the thread here: http://www.mail-archive.com/spamdyke-users@spamdyke.org/msg02032.html Reader's Digest version...If you're going to use the "relay" file, you'll have to patch SpamDyke, at least for now. The alternative is to put what you'd put in the relay file into tcp.smtp, and don't use the "access-file" in SpamDyke. Michael J. Colvin NorCal Internet Services www.norcalisp.com > -----Original Message----- > From: Michael Colvin [mailto:mcol...@norcalisp.com] > Sent: Wednesday, January 12, 2011 1:15 PM > To: qmailtoaster-list@qmailtoaster.com > Subject: RE: [qmailtoaster] Re: SpamAssassin not being invoked by > SimContro > > Ok... Just to follow-up... > > I set the entries in the "relay" file as described in SpamDyke's > documentation, same result. > > I remarked out the lines in the "relay" file, effectively making it > "Empty". > SpamAssassin is still not called. > > Now, I'm not sure if calling an "empty" file is causing an issue.... > > When I ran the spamdyke tests, I didn't get any errors... I'm going to > move > over to SpamDyke's list now, and see what Sam thinks... > > > Michael J. Colvin > NorCal Internet Services > www.norcalisp.com > > > > > > -----Original Message----- > > From: Michael Colvin [mailto:mcol...@norcalisp.com] > > Sent: Wednesday, January 12, 2011 12:45 PM > > To: qmailtoaster-list@qmailtoaster.com > > Subject: RE: [qmailtoaster] Re: SpamAssassin not being invoked by > > SimContro > > > > Ok... I've got it narrowed down to the relay file... > > > > I remarked out the "access-file" line, and e-mail gets scanned now... > So, > > it must be how I have the info entered... > > > > Not sure where I got that just the IP was sufficient... The > documentation > > obviously lists the ":" and second value criteria... > > > > So, let me play around with that file and see if I can get the relaying > I > > need, without the bailing out on SpamAssassin. > > > > I'll let you know. > > > > > > Michael J. Colvin > > NorCal Internet Services > > www.norcalisp.com > > > > > > > > > > > -----Original Message----- > > > From: Eric Shubert [mailto:e...@shubes.net] > > > Sent: Wednesday, January 12, 2011 12:08 PM > > > To: qmailtoaster-list@qmailtoaster.com > > > Subject: [qmailtoaster] Re: SpamAssassin not being invoked by > SimContro > > > > > > I've been using the tcp.smtp file in lieu of spamdyke's access file. I > > > don't think the access file is useful in QMT, since qmail has the SMTP > > > AUTH patch. I'm not certain of this though, and would like to know > Sam's > > > take on this. I think taking this to the spamdyke list is a good idea. > > > > > > It appears to me from the documentation that spamdyke's access-file > > > should be formatted like: > > > 69.224.211.10:ACCESS > > > not just the IP address. I wonder if this is causing the problem. If > > > there is no ":" in that file, I would expect spamdyke to throw an > error > > > or warning of some kind though. Have you run spamdyke in test mode to > > > check for errors? See the qtp-install-spamdyke script for how to do > > this. > > > > > > -- > > > -Eric 'shubes' > > > > > > On 01/12/2011 12:08 PM, Michael Colvin wrote: > > > > OK... So, I pulled spamdyke out of the picture, and what do you > know, > > > > suddenly the simscan line shows what we'd expect: > > > > > > > > Received: by simscan 1.4.0 ppid: 23321, pid: 23323, t: 0.2519s > > > > scanners: attach: 1.4.0 clamav: 0.96.3/m:53/d:12510 spam: > > > 3.2.5 > > > > X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on > > > > mail.norcalisp.com > > > > X-Spam-Level: *** > > > > X-Spam-Status: No, score=3.5 required=5.0 > > > tests=DK_SIGNED,FH_DATE_PAST_20XX, > > > > HTML_MESSAGE,RDNS_NONE autolearn=no version=3.2.5 > > > > > > > > So... I've got something in SpamDyke that's likely setting > > RELAYCLIENT. > > > > > > > > I'm pretty certain it's not whitelist_ip, since I pulled the > internal > > > range > > > > out. I also pulled it out of the "relay" file that access-file in > the > > > > spamdyke.conf file points too. > > > > > > > > Here's my spamdyke.conf > > > > > > > > log-level=info > > > > access-file=/var/qmail/control/relay > > > > local-domains-file=/var/qmail/control/rcpthosts > > > > max-recipients=20 > > > > idle-timeout-secs=180 > > > > greeting-delay-secs=0 > > > > graylist-level=always > > > > graylist-dir=/var/spamdyke/graylist > > > > graylist-min-secs=300 > > > > graylist-max-secs=1814400 > > > > #policy-url=http://www.norcalisp.com/nospam?reason= > > > > sender-blacklist-file=/etc/spamdyke/blacklist_senders > > > > sender-whitelist-file=/etc/spamdyke/whitelist_senders > > > > ip-whitelist-file=/etc/spamdyke/whitelist_ip > > > > rdns-whitelist-file=/etc/spamdyke/whitelist_rdns > > > > reject-missing-sender-mx > > > > reject-ip-in-cc-rdns > > > > ip-blacklist-file=/etc/spamdyke/blacklist_ip > > > > recipient-blacklist-file=/etc/spamdyke/blacklist_recipients > > > > #ip-in-rdns-keyword-blacklist-file=/etc/spamdyke/blacklist_keywords > > > > #rdns-blacklist-dir=/etc/spamdyke/blacklist_rdns.d > > > > reject-empty-rdns > > > > #reject-unresolvable-rdns > > > > dns-blacklist-entry=zen.spamhaus.org > > > > dns-blacklist-entry=b.barracudacentral.org > > > > dns-blacklist-entry=cbl.abuseat.org > > > > dns-blacklist-entry=list.dsbl.org > > > > dns-blacklist-entry=bl.spamcop.net > > > > dns-blacklist-entry=bogons.cymru.com > > > > # > > > > tls-certificate-file=/var/qmail/control/servercert.pem > > > > tls-level=smtp > > > > > > > > Here's the whitelist_ip file: > > > > > > > > 127.0.0.1 > > > > 69.224.211.10 > > > > > > > > All other whitelist_X files are empty. > > > > > > > > The "relay" file has: > > > > > > > > 69.224.211.10 > > > > > > > > This entry is a specific client I needed to relay...But I don't see > > how > > > that > > > > would be causing any issues, since the e-mail isn't coming from > them. > > > :-) > > > > > > > > I can't find anything else that might be causing spamdyke to set the > > > > RELAYCLIENT flag... > > > > > > > > At this point, it looks like this is more SpamDyke related than QMT, > > so > > > I > > > > should probably move this over there... Unless you have any parting > > > > thoughts, maybe we can pick this up over there. > > > > > > > > Michael J. Colvin > > > > NorCal Internet Services > > > > www.norcalisp.com > > > > > > > > > > > > > > > > > > > >> -----Original Message----- > > > >> From: Michael Colvin [mailto:mcol...@norcalisp.com] > > > >> Sent: Wednesday, January 12, 2011 9:59 AM > > > >> To: qmailtoaster-list@qmailtoaster.com > > > >> Subject: RE: [qmailtoaster] Re: SpamAssassin not being invoked by > > > >> SimContro > > > >> > > > >> Agreed (With the authenticating hosting servers part). This was a > > > quick > > > >> (And I thought ok) way of getting these toasters up... I'm > obviously > > > >> going > > > >> to have to go back through and tweak some stuff. > > > >> > > > >> I'll pull spamdyke down, test again, and let you know. I'm going > to > > > re- > > > >> read > > > >> the link you included to the Relaying portion of SpamDykes config > > > first, > > > >> to > > > >> see if I have a "Duh" moment. > > > >> > > > >> I'll keep you posted! > > > >> > > > >> Thanks again. > > > >> > > > >> > > > >> Michael J. Colvin > > > >> NorCal Internet Services > > > >> www.norcalisp.com > > > >> > > > >> > > > >> > > > >> > > > >>> -----Original Message----- > > > >>> From: Eric Shubert [mailto:e...@shubes.net] > > > >>> Sent: Wednesday, January 12, 2011 9:53 AM > > > >>> To: qmailtoaster-list@qmailtoaster.com > > > >>> Subject: [qmailtoaster] Re: SpamAssassin not being invoked by > > > SimContro > > > >>> > > > >>> I think I understand. I did notice the QMR server further down the > > > line > > > >>> and wondered a little about it. > > > >>> > > > >>> I'd remove spamdyke temporarily at this point and test. Then > you'll > > > know > > > >>> for sure if spamdyke setting RELAYCLIENT is the cause or not. > > > >>> > > > >>> P.S. I realize that web hosting servers are a pita, but > configuring > > > them > > > >>> to authenticate is a good practice imo. Then you don't need any > open > > > >>> relaying. > > > >>> -- > > > >>> -Eric 'shubes' > > > >>> > > > >>> On 01/12/2011 10:35 AM, Michael Colvin wrote: > > > >>>> Ummm... Mainly I think it was laziness so that the web hosting > > > >> servers > > > >>>> could send via these servers. (Instead of listing just the > > specific > > > >>>> internal IP's, since I add servers occasionally...) > > > >>>> > > > >>>> I think there was another reason involving how my outbound mail > is > > > >>> working, > > > >>>> but now that I'm trying to explain it in an e-mail, I'm not sure > > > >> *that* > > > >>>> reason is valid, so I'll need to think about that one. :-) > > > >>>> > > > >>>> The particular servers we're looking at hear, handle inbound e- > mail > > > >>>> filtering only, then forward the mail to another cluster that's > > > >> customer > > > >>>> facing. > > > >>>> > > > >>>> So... Ok, now I need to figure out where it's getting that from, > > > >>> because, > > > >>>> I'm not sure you saw the other message, but I removed the > internal > > > >>> network > > > >>>> from the whitelisting, and still nothing. > > > >>>> > > > >>>> And, now that I think about it, the e-mail isn't coming from an > > > >> internal > > > >>> IP > > > >>>> at the point we're looking at... The server has an internal IP, > > but > > > >> it > > > >>> is > > > >>>> the first server to handle the e-mail, so it's not getting it > from > > > >>> another > > > >>>> server with an internal IP. It has an internal IP because it's > > > behind > > > >> a > > > >>>> load balancer. > > > >>>> > > > >>>> I think what we're seeing, and what CJ was seeing (BTW, thanks > CJ, > > > >> your > > > >>>> comment is what got me looking in this direction) was the > *second* > > > >>> cluster, > > > >>>> which is getting the e-mail from the first cluster via internal > > > >>> IP's...I'm > > > >>>> not concerned with that server not scanning w/spamassassin, since > > it > > > >>> should > > > >>>> be scanned with the first cluster. :-) Besides, that second > > cluster > > > >> is > > > >>> an > > > >>>> older QMR server that I want to pull out, once I get it replaced > > with > > > >>> QMT > > > >>>> servers... > > > >>>> > > > >>>> Here's the header from your e-mail. Notice the first few lines, > > with > > > >>> one > > > >>>> containing "qmail-scanner". Obviously, this isn't a Toaster. > > > Further > > > >>> down, > > > >>>> we see the Toaster's headers, which is still the area we were > > looking > > > >> at > > > >>>> with the simscan entries. > > > >>>> > > > >>>> (Continued after header!) > > > >>>> > > > >>>> ----------------------------------------- > > > >>>> > > > >>>> > > > >>>> Received: (qmail 10090 invoked by uid 1010); 12 Jan 2011 09:04:54 > - > > > >> 0800 > > > >>>> Received: from 192.168.100.121 by mail.norcalisp.com (envelope- > from > > > >>>> <qmailtoaster-list-return-9149- > > > >> mcolvin=norcalisp....@qmailtoaster.com>, > > > >>> uid > > > >>>> 1008) with qmail-scanner-1.25-st-qms > > > >>>> (clamdscan: 0.91.2/1082. spamassassin: 3.2.0. perlscan: 1.25- > st- > > > qms. > > > >>>> Clear:RC:1(192.168.100.121):. > > > >>>> Processed in 0.058344 secs); 12 Jan 2011 17:04:54 -0000 > > > >>>> X-Antivirus-NorCalISP-Mail-From: > > > >>>> qmailtoaster-list-return-9149- > > mcolvin=norcalisp....@qmailtoaster.com > > > >> via > > > >>>> mail.norcalisp.com > > > >>>> X-Antivirus-NorCalISP: 1.25-st-qms (Clear:RC:1(192.168.100.121):. > > > >>> Processed > > > >>>> in 0.058344 secs Process 10085) > > > >>>> Received: from unknown (HELO mail.norcalisp.com) > (192.168.100.121) > > > >>>> by mail.norcalisp.com with SMTP; 12 Jan 2011 09:04:53 -0800 > > > >>>> Received: (qmail 5478 invoked by uid 89); 12 Jan 2011 17:04:53 - > > 0000 > > > >>>> Received: by simscan 1.4.0 ppid: 5155, pid: 5189, t: 23.0613s > > > >>>> scanners: attach: 1.4.0 clamav: 0.96.3/m:53/d:12509 > > > >>>> Received: from unknown (HELO mail.qmailtoaster.com) > (70.60.227.157) > > > >>>> by mail.norcalisp.com with SMTP; 12 Jan 2011 17:04:30 -0000 > > > >>>> Received: (qmail 10722 invoked by uid 89); 12 Jan 2011 17:03:39 - > > 0000 > > > >>>> Mailing-List: contact qmailtoaster-list-h...@qmailtoaster.com; > run > > by > > > >>> ezmlm > > > >>>> Precedence: bulk > > > >>>> List-Post:<mailto:qmailtoaster-list@qmailtoaster.com> > > > >>>> List-Help:<mailto:qmailtoaster-list-h...@qmailtoaster.com> > > > >>>> List-Unsubscribe:<mailto:qmailtoaster-list- > > > >> unsubscr...@qmailtoaster.com> > > > >>>> List-Subscribe:<mailto:qmailtoaster-list- > > subscr...@qmailtoaster.com> > > > >>>> Reply-To: qmailtoaster-list@qmailtoaster.com > > > >>>> Delivered-To: mailing list qmailtoaster-list@qmailtoaster.com > > > >>>> Received: (qmail 10715 invoked by uid 89); 12 Jan 2011 17:03:39 - > > 0000 > > > >>>> X-Spam-Checker-Version: SpamAssassin 3.2.5 (2008-06-10) on > > > >>>> mail.qmailtoaster.com > > > >>>> X-Spam-Level: > > > >>>> X-Spam-Status: No, score=-1.4 required=5.0 tests=AWL,BAYES_00, > > > >>>> DK_POLICY_SIGNALL autolearn=ham version=3.2.5 > > > >>>> Received-SPF: pass (mail.qmailtoaster.com: SPF record at > > m.gmane.org > > > >>>> designates 80.91.229.12 as permitted sender) > > > >>>> X-Injected-Via-Gmane: http://gmane.org/ > > > >>>> To: qmailtoaster-list@qmailtoaster.com > > > >>>> From: Eric Shubert<e...@shubes.net> > > > >>>> Date: Wed, 12 Jan 2011 10:03:15 -0700 > > > >>>> Organization: Eric Shubert& Associates > > > >>>> Lines: 418 > > > >>>> Message-ID:<igkmsj$3n...@dough.gmane.org> > > > >>>> References:<01fb01cbb05c$cdadf280$6909d7...@com> > > > >>>> <igdmcu$50...@dough.gmane.org> > > > <020301cbb068$a4405d00$ecc117...@com> > > > >>>> <igdt2h$s1...@dough.gmane.org> > > > <020a01cbb07d$5e13af20$1a3b0d...@com> > > > >>>> <igfcn4$hl...@dough.gmane.org> > > > <028301cbb18e$88fac7c0$9af057...@com> > > > >>>> <20110111081003.52761c20gaaza...@mail.yother.com> > > > >>>> <igi0to$gn...@dough.gmane.org> > > > >>> <000f01cbb1bb$3d1cf620$0200a...@homeoffice> > > > >>>> <igi9n4$32...@dough.gmane.org> > > > >>> <005101cbb201$9785c970$0200a...@homeoffice> > > > >>>> Mime-Version: 1.0 > > > >>>> Content-Type: text/plain; charset=windows-1252; format=flowed > > > >>>> Content-Transfer-Encoding: 8bit > > > >>>> X-Complaints-To: use...@dough.gmane.org > > > >>>> X-Gmane-NNTP-Posting-Host: rain.gmane.org > > > >>>> User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; > rv:1.9.2.13) > > > >>>> Gecko/20101208 Thunderbird/3.1.7 > > > >>>> In-Reply-To:<005101cbb201$9785c970$0200a...@homeoffice> > > > >>>> Subject: [qmailtoaster] Re: SpamAssassin not being invoked by > > > >> SimContro > > > >>>> > > > >>>> > > > >>>> ----------------------------------------- > > > >>>> > > > >>>> So... I've checked my Spamdyke config, and don't see anything > that > > > >> would > > > >>>> cause it to pass RELAYCLIENT... No whitelisted e-mails, domains, > > and > > > >> I > > > >>>> removed the IP's (Or narrowed them down to just the servers). > Same > > > >>>> result... > > > >>>> > > > >>>> But I think we might be on the right track... > > > >>>> > > > >>>> > > > >>>> Michael J. Colvin > > > >>>> NorCal Internet Services > > > >>>> www.norcalisp.com > > > >>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>>> -----Original Message----- > > > >>>>> From: Eric Shubert [mailto:e...@shubes.net] > > > >>>>> Sent: Wednesday, January 12, 2011 9:03 AM > > > >>>>> To: qmailtoaster-list@qmailtoaster.com > > > >>>>> Subject: [qmailtoaster] Re: SpamAssassin not being invoked by > > > >> SimContro > > > >>>>> > > > >>>>> Bingo! That's it all right. Nice bit of sleuthing, Michael. > > > >>>>> > > > >>>>> My apologies to CJ as he was on the right track. I missed the > bit > > > >> about > > > >>>>> your local lan addresses being whitelisted though. > > > >>>>> > > > >>>>> Spamdyke's documentation at > > > >>>>> http://www.spamdyke.org/documentation/README.html#RELAYING says: > > > >>>>> "Authenticated and whitelisted connections will be allowed to > > > relay." > > > >>>>> > > > >>>>> So my question now is, why do you have your LAN whitelisted? > > > >>>>> > > > >>>>> -- > > > >>>>> -Eric 'shubes' > > > >>>>> > > > >>>>> On 01/11/2011 07:37 PM, Michael Colvin wrote: > > > >>>>>> Eric.. Check this thread out... I think this may be pointing > me > > > in > > > >>> the > > > >>>>>> right direction... > > > >>>>>> > > > >>>>>> http://osdir.com/ml/mail.qmail.simscan/2007-12/msg00029.html > > > >>>>>> > > > >>>>>> The 2nd paragraph... "Because relay client is set, simscan > > doesnt > > > >>> run > > > >>>>> the > > > >>>>>> message through SpamAssassin (Since it's supposedly from a > > trusted > > > >>>>> source). > > > >>>>>> > > > >>>>>> Could spamdyke be passing a value for "RELAYCLIENT"? I've got > > the > > > >>>>>> 192.168.100.0/24 (The private network my mail cluster is on) > > > >>>>> "Whitelisted" > > > >>>>>> in spamdyke... > > > >>>>>> > > > >>>>>> Any place else that might be passing RELAYCLIENT? It's not in > my > > > >>>>> tcp.smtp > > > >>>>>> file. > > > >>>>>> > > > >>>>>> > > > >>>>>> > > > >>>>>> Michael J. Colvin > > > >>>>>> NorCal Internet Services > > > >>>>>> www.norcalisp.com > > > >>>>>> > > > >>>>>> > > > >>>>>> > > > >>>>>> > > > >>>>>>> -----Original Message----- > > > >>>>>>> From: Eric Shubert [mailto:e...@shubes.net] > > > >>>>>>> Sent: Tuesday, January 11, 2011 11:06 AM > > > >>>>>>> To: qmailtoaster-list@qmailtoaster.com > > > >>>>>>> Subject: [qmailtoaster] Re: SpamAssassin not being invoked by > > > >>> SimContro > > > >>>>>>> > > > >>>>>>> I'm at a loss Michael. I think I'd look closer into > spamassassin > > > at > > > >>>>> this > > > >>>>>>> point. Can you invoke SA 'manually'? > > > >>>>>>> > > > >>>>>>> On 01/11/2011 11:13 AM, Michael Colvin wrote: > > > >>>>>>>> Here you go Eric. Both servers had identical outputs, other > > than > > > >>> one > > > >>>>>>> being > > > >>>>>>>> installed the day after this one. :-) > > > >>>>>>>> > > > >>>>>>>> Name : simscan-toaster Relocations: (not > > > >>>>>>> relocatable) > > > >>>>>>>> Version : 1.4.0 Vendor: > (none) > > > >>>>>>>> Release : 1.3.8 Build Date: Fri > 29 > > > Oct > > > >>>>> 2010 > > > >>>>>>>> 02:28:37 AM PDT > > > >>>>>>>> Install Date: Fri 29 Oct 2010 02:30:25 AM PDT Build > Host: > > > >>>>>>>> mail-1.norcalisp.com > > > >>>>>>>> Group : Networking/Other Source RPM: > > > >>>>>>>> simscan-toaster-1.4.0-1.3.8.src.rpm > > > >>>>>>>> Size : 113364 License: GPL > > > >>>>>>>> Signature : (none) > > > >>>>>>>> Packager : Jake Vickers<j...@qmailtoaster.com> > > > >>>>>>>> URL : http://www.inter7.com/vpopmail > > > >>>>>>>> Summary : Simscan for qmail-toaster > > > >>>>>>>> Description : > > > >>>>>>>> > > > >>>>>>>> SimScan is a simplified scanner for qmail similar to qmail- > > > scanner > > > >>> and > > > >>>>>>>> qscand. > > > >>>>>>>> It uses clamav, trophie, and/or spamassassin. It also > supports > > > >>>>>>> attachment > > > >>>>>>>> blocking by extension. Simscan is written entirely in C to > > > ensure > > > >>>>>>> maximum > > > >>>>>>>> speed. There are several options to allow simscan to scan > per > > > >>> domain, > > > >>>>>>> and > > > >>>>>>>> reject spam mail. > > > >>>>>>>> > > > >>>>>>>> > > > >>>>>>>> Current settings > > > >>>>>>>> --------------------------------------- > > > >>>>>>>> user = clamav > > > >>>>>>>> qmail directory = /var/qmail > > > >>>>>>>> work directory = /var/qmail/simscan > > > >>>>>>>> control directory = /var/qmail/control > > > >>>>>>>> qmail queue program = /var/qmail/bin/qmail-queue > > > >>>>>>>> clamdscan program = /usr/bin/clamdscan > > > >>>>>>>> clamav scan = ON > > > >>>>>>>> trophie scanning = OFF > > > >>>>>>>> attachement scan = ON > > > >>>>>>>> ripmime program = /usr/bin/ripmime > > > >>>>>>>> custom smtp reject = ON > > > >>>>>>>> drop message = OFF > > > >>>>>>>> regex scanner = OFF > > > >>>>>>>> quarantine processing = OFF > > > >>>>>>>> domain based checking = ON > > > >>>>>>>> add received header = ON > > > >>>>>>>> spam scanning = ON > > > >>>>>>>> spamc program = /usr/bin/spamc > > > >>>>>>>> spamc arguments = > > > >>>>>>>> spamc user = OFF > > > >>>>>>>> authenticated users scanned = OFF > > > >>>>>>>> spam passthru = OFF > > > >>>>>>>> spam hits = 40 > > > >>>>>>>> > > > >>>>>>>> Current simcontrol config > > > >>>>>>>> ---------------------------------------------------- > -- > > -- > > > -- > > > >>>>>>>> > > > :clam=yes,spam=yes,spam_hits=12,attach=.mp3:.src:.bat:.pif > > > >>>>>>>> > > > >>>>>>>> > > > >>>>>>>> Michael J. Colvin > > > >>>>>>>> NorCal Internet Services > > > >>>>>>>> www.norcalisp.com > > > >>>>>>>> > > > >>>>>>>> > > > >>>>>>>> > > > >>>>>>>>> -----Original Message----- > > > >>>>>>>>> From: Eric Shubert [mailto:e...@shubes.net] > > > >>>>>>>>> Sent: Tuesday, January 11, 2011 8:36 AM > > > >>>>>>>>> To: qmailtoaster-list@qmailtoaster.com > > > >>>>>>>>> Subject: [qmailtoaster] Re: SpamAssassin not being invoked > by > > > >>>>> SimContro > > > >>>>>>>>> > > > >>>>>>>>> I don't think so, Cecil. I have QMT hosts behind NAT > routers, > > > and > > > >>> SA > > > >>>>>>>>> still scans. Authenticated submissions aren't scanned > though. > > > >>>>>>>>> > > > >>>>>>>>> Michael, can you post your > > > >>>>>>>>> # rpm -qi simscan-toaster > > > >>>>>>>>> (just double checking) > > > >>>>>>>>> > > > >>>>>>>>> -- > > > >>>>>>>>> -Eric 'shubes' > > > >>>>>>>>> > > > >>>>>>>>> On 01/11/2011 09:10 AM, Cecil Yother, Jr wrote: > > > >>>>>>>>>> Isn't there something about LAN addresses not being > scanned? > > > >>>>>>>>>> > > > >>>>>>>>>> Quoting "Michael J. Colvin"<mcol...@norcalisp.com>: > > > >>>>>>>>>> > > > >>>>>>>>>>> OK. Tcp.smtp now looks like: > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>> > > > >>>>>>> > > > >>>>> > > > >>> > > > >> > > > > > > :allow,BADMIMETYPE="",SENDER_NOCHECK="1",BADLOADERTYPE="M",QMAILQUEUE="/va > > > >>>>>>>>> r/ > > > >>>>>>>>>>> > > > >>>>>>>>>>> qmail/bin/simscan",NOP0FCHECK="1" > > > >>>>>>>>>>> > > > >>>>>>>>>>> Header information is still the same: > > > >>>>>>>>>>> > > > >>>>>>>>>>> Received: (qmail 28565 invoked by uid 1010); 11 Jan 2011 > > > >> 04:41:02 > > > >>> - > > > >>>>>>> 0800 > > > >>>>>>>>>>> Received: from 192.168.100.122 by mail.norcalisp.com > > > (envelope- > > > >>> from > > > >>>>>>>>>>> <norcalinter...@gmail.com>, uid 1008) with qmail-scanner- > > 1.25- > > > >> st- > > > >>>>> qms > > > >>>>>>>>>>> (clamdscan: 0.91.2/1082. spamassassin: 3.2.0. perlscan: > > 1.25- > > > >> st- > > > >>>>> qms. > > > >>>>>>>>>>> Clear:RC:1(192.168.100.122):. > > > >>>>>>>>>>> Processed in 0.066093 secs); 11 Jan 2011 12:41:02 -0000 > > > >>>>>>>>>>> X-Antivirus-NorCalISP-Mail-From: norcalinter...@gmail.com > > via > > > >>>>>>>>>>> mail.norcalisp.com > > > >>>>>>>>>>> X-Antivirus-NorCalISP: 1.25-st-qms > > > >> (Clear:RC:1(192.168.100.122):. > > > >>>>>>>>>>> Processed > > > >>>>>>>>>>> in 0.066093 secs Process 28558) > > > >>>>>>>>>>> Received: from unknown (HELO mail.norcalisp.com) > > > >>> (192.168.100.122) > > > >>>>>>>>>>> by mail.norcalisp.com with SMTP; 11 Jan 2011 04:41:02 - > 0800 > > > >>>>>>>>>>> Received: (qmail 12610 invoked by uid 89); 11 Jan 2011 > > > 12:41:01 > > > >> - > > > >>>>> 0000 > > > >>>>>>>>>>> Received: by simscan 1.4.0 ppid: 12605, pid: 12606, t: > > 0.0623s > > > >>>>>>>>>>> scanners: attach: 1.4.0 clamav: 0.96.3/m:53/d:12505 > > > >>>>>>>>>>> Received: from unknown (HELO mail-iw0-f177.google.com) > > > >>>>>>> (209.85.214.177) > > > >>>>>>>>>>> by mail.norcalisp.com with SMTP; 11 Jan 2011 12:41:01 - > 0000 > > > >>>>>>>>>>> Received: by iwn38 with SMTP id 38so21353335iwn.36 > > > >>>>>>>>>>> for<mcol...@norcalisp.com>; Tue, 11 Jan 2011 04:40:29 - > 0800 > > > >> (PST) > > > >>>>>>>>>>> DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; > > > >>>>>>>>>>> d=gmail.com; s=gamma; > > > >>>>>>>>>>> h=domainkey-signature:mime- > > > >>> version:received:received:date:message- > > > >>>>> id > > > >>>>>>>>>>> :subject:from:to:content-type; > > > >>>>>>>>>>> bh=4s2kmb0Iocy2ztenUiYdvwfIbdXrWGJeKE8RR03gj6M=; > > > >>>>>>>>>>> > > > >>>>> > > b=AeiBKelfTf69Q/7TaoVAOqclbwmsAtr9RHblGmZZ5oL2ItVlbR3QbvwR2P0mijE3BM > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>> > > KT9zmta/DCJW18pRpoKgLalMbWis+Uc7DBF1wPG+cbKidqL0aIctyYzASvBT93LYtepG > > > >>>>>>>>>>> cVdflalC1w9g0xudt1bjHwJkg4FmtC0EkoZ9A= > > > >>>>>>>>>>> DomainKey-Signature: a=rsa-sha1; c=nofws; > > > >>>>>>>>>>> d=gmail.com; s=gamma; > > > >>>>>>>>>>> h=mime-version:date:message-id:subject:from:to:content- > type; > > > >>>>>>>>>>> > > > >>>>> > > b=pFOBpl0EItTK62RMwoCVcr8N0UknO/Rwu9KA9n4puf1BIOTWDBWLhUqThVh1DXvTjY > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>> > > jibiALvAE5jyGJCwqA2UgmqdcvNSeZQ7ylhYp5KLxYoa9CqyX0qohG9Xvn4M0g3dX/yJ > > > >>>>>>>>>>> M1bLffv+FTJoqp9sKJ0ro4s/+EhvWQpm2cQGs= > > > >>>>>>>>>>> MIME-Version: 1.0 > > > >>>>>>>>>>> Received: by 10.42.241.199 with SMTP id > > > >>>>>>>>> lf7mr4139326icb.93.1294749629840; > > > >>>>>>>>>>> Tue, > > > >>>>>>>>>>> 11 Jan 2011 04:40:29 -0800 (PST) > > > >>>>>>>>>>> Received: by 10.42.230.5 with HTTP; Tue, 11 Jan 2011 > > 04:40:29 > > > - > > > >>> 0800 > > > >>>>>>>>> (PST) > > > >>>>>>>>>>> Date: Tue, 11 Jan 2011 04:40:29 -0800 > > > >>>>>>>>>>> Message-ID: > > > >>>>>>>>>>> <AANLkTimO65iopGbZTonw- > > opm2d7cvp4xhydcmbg4u...@mail.gmail.com> > > > >>>>>>>>>>> Subject: Testing > > > >>>>>>>>>>> From: NorCal Internet<norcalinter...@gmail.com> > > > >>>>>>>>>>> To: Michael Colvin<mcol...@norcalisp.com> > > > >>>>>>>>>>> Content-Type: multipart/alternative; > > > >>>>>>>>>>> boundary=20cf305496a9c27d9b04999163ea > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> No change on the "simscan" line... I still don't see > > anything > > > >> in > > > >>>>>>> qmlog > > > >>>>>>>>>>> spamd, other than the "Startup" stuff that was there from > my > > > >> last > > > >>>>>>>>> post... > > > >>>>>>>>>>> In fact, there's nothing but what I posted last time, > since > > > the > > > >>>>>>> server > > > >>>>>>>>>>> hasn't restarted... There's been no log entries in spamd > > since > > > >>>>>>>>>>> 1/9/2011... > > > >>>>>>>>>>> > > > >>>>>>>>>>> SpamAssassin is "On" in the default QMT, right? I mean, > it's > > > >>>>>>> obviously > > > >>>>>>>>>>> installed on the system, and SimScan is running... It just > > > >> seems > > > >>>>> like > > > >>>>>>>>>>> something is missing, and it's on both servers... I know > > this > > > >> is > > > >>>>>>> going > > > >>>>>>>>> to > > > >>>>>>>>>>> end in one of those "Duh!" moments... :-) > > > >>>>>>>>>>> > > > >>>>>>>>>>> Mike > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> -----Original Message----- > > > >>>>>>>>>>> From: Eric Shubert [mailto:e...@shubes.net] > > > >>>>>>>>>>> Sent: Monday, January 10, 2011 8:39 AM > > > >>>>>>>>>>> To: qmailtoaster-list@qmailtoaster.com > > > >>>>>>>>>>> Subject: [qmailtoaster] Re: SpamAssassin not being invoked > > by > > > >>>>>>> SimContro > > > >>>>>>>>>>> > > > >>>>>>>>>>> On 01/09/2011 09:17 PM, Michael J. Colvin wrote: > > > >>>>>>>>>>>> > > > >>>>>>>>>>>>> Have you run > > > >>>>>>>>>>>>> # qmailctl cdb > > > >>>>>>>>>>>>> recently? > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Several times, and even rebooted the whole server (Both > of > > > >> them) > > > >>>>> to > > > >>>>>>>>> make > > > >>>>>>>>>>>> sure the new cdb files were loaded. The cdb file's date > > stamp > > > >> is > > > >>>>>>> being > > > >>>>>>>>>>>> updated when I run qmailctl cdb. > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Again, what I think is the strangest part is, this is > > > >> happening > > > >>> on > > > >>>>>>> two > > > >>>>>>>>>>>> totally separate machines, both with basically "Stock" > ISO > > > >>>>> installs > > > >>>>>>> on > > > >>>>>>>>>>>> them... If it was happening to just one, I'd lean towards > a > > > >>> config > > > >>>>>>>>>>> error... > > > >>>>>>>>>>>> But with two of them, it's either something I did too > both > > of > > > >>> them > > > >>>>>>>>>>>> (Possible, of course) or something else... And, like I > > said, > > > I > > > >>>>>>> haven't > > > >>>>>>>>>>>> changed much from the stock install... Just the > rcpthosts, > > > >>>>>>> smtproutes, > > > >>>>>>>>>>>> tcp.smtp (As posted) and I think that's about it.. > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> (Shrug)... > > > >>>>>>>>>>>> > > > >>>>>>>>>>>> Mike > > > >>>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> Here's my tcp.smtp entry: > > > >>>>>>>>>>> > > > >>>>>>>>> > > > >>>>>>> > > > >>>>> > > > >>> > > > >> > > > > > > :allow,BADMIMETYPE="",BADLOADERTYPE="M",CHKUSER_RCPTLIMIT="50",CHKUSER_WRO > > > >>>>>>>>> NG > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>> > > > >>>>>>> > > > >>>>> > > > >>> > > > >> > > > > > > RCPTLIMIT="10",QMAILQUEUE="/var/qmail/bin/simscan",DKSIGN="/var/qmail/cont > > > >>>>>>>>> ro > > > >>>>>>>>>>> > > > >>>>>>>>>>> l/domainkeys/%/private",NOP0FCHECK="1" > > > >>>>>>>>>>> > > > >>>>>>>>>>> You appear to be missing NOP0FCHECK="1" in your > > configuration. > > > >>>>> IIRC, > > > >>>>>>>>> you > > > >>>>>>>>>>> really need that. I don't recall what happens w/out it, > but > > > I'd > > > >>> put > > > >>>>>>> it > > > >>>>>>>>>>> in and see if that fixes things. > > > >>>>>>>>>>> > > > >>>>>>>>>>> -- > > > >>>>>>>>>>> -Eric 'shubes' > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> ---------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> -- > > > >>>>>>>>> ----- > > > >>>>>>>>>>> > > > >>>>>>>>>>> ----- > > > >>>>>>>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>>>>>>>> (www.vickersconsulting.com) > > > >>>>>>>>>>> Vickers Consulting Group offers Qmailtoaster support and > > > >>>>>>> installations. > > > >>>>>>>>>>> If you need professional help with your setup, contact > them > > > >>> today! > > > >>>>>>>>>>> ---------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> -- > > > >>>>>>>>> ----- > > > >>>>>>>>>>> > > > >>>>>>>>>>> ----- > > > >>>>>>>>>>> Please visit qmailtoaster.com for the latest news, > updates, > > > and > > > >>>>>>>>>>> packages. > > > >>>>>>>>>>> > > > >>>>>>>>>>> To unsubscribe, e-mail: qmailtoaster-list- > > > >>>>>>> unsubscr...@qmailtoaster.com > > > >>>>>>>>>>> For additional commands, e-mail: > > > >>>>>>>>>>> qmailtoaster-list-h...@qmailtoaster.com > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> ---------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> -- > > > >>>>>>>>> ---------- > > > >>>>>>>>>>> > > > >>>>>>>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>>>>>>>> (www.vickersconsulting.com) > > > >>>>>>>>>>> Vickers Consulting Group offers Qmailtoaster support and > > > >>>>>>> installations. > > > >>>>>>>>>>> If you need professional help with your setup, contact > them > > > >>> today! > > > >>>>>>>>>>> ---------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> -- > > > >>>>>>>>> ---------- > > > >>>>>>>>>>> > > > >>>>>>>>>>> Please visit qmailtoaster.com for the latest news, > updates, > > > and > > > >>>>>>>>> packages. > > > >>>>>>>>>>> > > > >>>>>>>>>>> To unsubscribe, e-mail: qmailtoaster-list- > > > >>>>>>> unsubscr...@qmailtoaster.com > > > >>>>>>>>>>> For additional commands, e-mail: qmailtoaster-list- > > > >>>>>>>>> h...@qmailtoaster.com > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>>> > > > >>>>>>>>>> > > > >>>>>>>>>> > > > >>>>>>>>>> > > > >>>>>>>>>> cj's > > > >>>>>>>>>> 2318 Clement Ave > > > >>>>>>>>>> Alameda, CA 94501 > > > >>>>>>>>>> > > > >>>>>>>>>> http://www.yother.com > > > >>>>>>>>>> > > > >>>>>>>>>> Check out the new Volvoclassified! > > > >> http://www.volvoclassified.com > > > >>>>>>>>>> > > > >>>>>>>>>> ----------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> -- > > > >>>>>>>>> --------- > > > >>>>>>>>>> > > > >>>>>>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>>>>>>> (www.vickersconsulting.com) > > > >>>>>>>>>> Vickers Consulting Group offers Qmailtoaster support and > > > >>>>>>> installations. > > > >>>>>>>>>> If you need professional help with your setup, contact them > > > >> today! > > > >>>>>>>>> > > > >>>>>>>>> > > > >>>>>>>>> > > > >>>>>>>>> ------------------------------------------------------------ > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> --- > > > >>>>>>>>> ------- > > > >>>>>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>>>>>> (www.vickersconsulting.com) > > > >>>>>>>>> Vickers Consulting Group offers Qmailtoaster support > > and > > > >>>>>>>>> installations. > > > >>>>>>>>> If you need professional help with your setup, > > contact > > > >>> them > > > >>>>>>> today! > > > >>>>>>>>> ------------------------------------------------------------ > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> --- > > > >>>>>>>>> ------- > > > >>>>>>>>> Please visit qmailtoaster.com for the latest news, > > > >> updates, > > > >>>>> and > > > >>>>>>>>> packages. > > > >>>>>>>>> > > > >>>>>>>>> To unsubscribe, e-mail: qmailtoaster-list- > > > >>>>>>>>> unsubscr...@qmailtoaster.com > > > >>>>>>>>> For additional commands, e-mail: qmailtoaster-list- > > > >>>>>>>>> h...@qmailtoaster.com > > > >>>>>>>>> > > > >>>>>>>> > > > >>>>>>>> > > > >>>>>>>> > > > >>>>>>>> ------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> -- > > > >>>>>>> --------- > > > >>>>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>>>> (www.vickersconsulting.com) > > > >>>>>>>> Vickers Consulting Group offers Qmailtoaster support > > and > > > >>>>>>> installations. > > > >>>>>>>> If you need professional help with your setup, > > contact > > > >> them > > > >>>>>>> today! > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> -- > > > >>>>>>> -Eric 'shubes' > > > >>>>>>> > > > >>>>>>> > > > >>>>>>> -------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> --- > > > >>>>>>> ------- > > > >>>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>>>> (www.vickersconsulting.com) > > > >>>>>>> Vickers Consulting Group offers Qmailtoaster support > and > > > >>>>>>> installations. > > > >>>>>>> If you need professional help with your setup, > contact > > > them > > > >>>>> today! > > > >>>>>>> -------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> --- > > > >>>>>>> ------- > > > >>>>>>> Please visit qmailtoaster.com for the latest news, > > > updates, > > > >>> and > > > >>>>>>> packages. > > > >>>>>>> > > > >>>>>>> To unsubscribe, e-mail: qmailtoaster-list- > > > >>>>>>> unsubscr...@qmailtoaster.com > > > >>>>>>> For additional commands, e-mail: qmailtoaster-list- > > > >>>>>>> h...@qmailtoaster.com > > > >>>>>>> > > > >>>>>> > > > >>>>>> > > > >>>>>> > > > >>>>>> --------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> -- > > > >>>>> --------- > > > >>>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>> (www.vickersconsulting.com) > > > >>>>>> Vickers Consulting Group offers Qmailtoaster support and > > > >>>>> installations. > > > >>>>>> If you need professional help with your setup, contact > > > them > > > >>>>> today! > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> ---------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> --- > > > >>>>> ------- > > > >>>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>>>> (www.vickersconsulting.com) > > > >>>>> Vickers Consulting Group offers Qmailtoaster support and > > > >>>>> installations. > > > >>>>> If you need professional help with your setup, contact > > them > > > >>> today! > > > >>>>> ---------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> --- > > > >>>>> ------- > > > >>>>> Please visit qmailtoaster.com for the latest news, > updates, > > > and > > > >>>>> packages. > > > >>>>> > > > >>>>> To unsubscribe, e-mail: qmailtoaster-list- > > > >>>>> unsubscr...@qmailtoaster.com > > > >>>>> For additional commands, e-mail: qmailtoaster-list- > > > >>>>> h...@qmailtoaster.com > > > >>>>> > > > >>>> > > > >>>> > > > >>>> > > > >>>> ----------------------------------------------------------------- > -- > > -- > > > - > > > >> -- > > > >>> --------- > > > >>>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>> (www.vickersconsulting.com) > > > >>>> Vickers Consulting Group offers Qmailtoaster support and > > > >>> installations. > > > >>>> If you need professional help with your setup, contact > them > > > >>> today! > > > >>> > > > >>> > > > >>> > > > >>> ------------------------------------------------------------------ > -- > > -- > > > -- > > > >> -- > > > >>> ------- > > > >>> Qmailtoaster is sponsored by Vickers Consulting Group > > > >>> (www.vickersconsulting.com) > > > >>> Vickers Consulting Group offers Qmailtoaster support and > > > >>> installations. > > > >>> If you need professional help with your setup, contact them > > > today! > > > >>> ------------------------------------------------------------------ > -- > > -- > > > -- > > > >> -- > > > >>> ------- > > > >>> Please visit qmailtoaster.com for the latest news, updates, > > and > > > >>> packages. > > > >>> > > > >>> To unsubscribe, e-mail: qmailtoaster-list- > > > >>> unsubscr...@qmailtoaster.com > > > >>> For additional commands, e-mail: qmailtoaster-list- > > > >>> h...@qmailtoaster.com > > > >>> > > > >> > > > >> > > > >> > > > >> ------------------------------------------------------------------- > -- > > -- > > > --- > > > >> ------- > > > >> Qmailtoaster is sponsored by Vickers Consulting Group > > > >> (www.vickersconsulting.com) > > > >> Vickers Consulting Group offers Qmailtoaster support and > > > >> installations. > > > >> If you need professional help with your setup, contact them > > > today! > > > >> ------------------------------------------------------------------- > -- > > -- > > > --- > > > >> ------- > > > >> Please visit qmailtoaster.com for the latest news, updates, > and > > > >> packages. > > > >> > > > >> To unsubscribe, e-mail: qmailtoaster-list- > > > >> unsubscr...@qmailtoaster.com > > > >> For additional commands, e-mail: qmailtoaster-list- > > > >> h...@qmailtoaster.com > > > >> > > > > > > > > > > > > > > > > -------------------------------------------------------------------- > -- > > -- > > > --------- > > > > Qmailtoaster is sponsored by Vickers Consulting Group > > > (www.vickersconsulting.com) > > > > Vickers Consulting Group offers Qmailtoaster support and > > > installations. > > > > If you need professional help with your setup, contact them > > > today! > > > > > > > > > > > > ---------------------------------------------------------------------- > -- > > -- > > > ------- > > > Qmailtoaster is sponsored by Vickers Consulting Group > > > (www.vickersconsulting.com) > > > Vickers Consulting Group offers Qmailtoaster support and > > > installations. > > > If you need professional help with your setup, contact them > today! > > > ---------------------------------------------------------------------- > -- > > -- > > > ------- > > > Please visit qmailtoaster.com for the latest news, updates, and > > > packages. > > > > > > To unsubscribe, e-mail: qmailtoaster-list- > > > unsubscr...@qmailtoaster.com > > > For additional commands, e-mail: qmailtoaster-list- > > > h...@qmailtoaster.com > > > > > > > > > > > ------------------------------------------------------------------------ > -- > > ------- > > Qmailtoaster is sponsored by Vickers Consulting Group > > (www.vickersconsulting.com) > > Vickers Consulting Group offers Qmailtoaster support and > > installations. > > If you need professional help with your setup, contact them today! > > ------------------------------------------------------------------------ > -- > > ------- > > Please visit qmailtoaster.com for the latest news, updates, and > > packages. > > > > To unsubscribe, e-mail: qmailtoaster-list- > > unsubscr...@qmailtoaster.com > > For additional commands, e-mail: qmailtoaster-list- > > h...@qmailtoaster.com > > > > > > -------------------------------------------------------------------------- > ------- > Qmailtoaster is sponsored by Vickers Consulting Group > (www.vickersconsulting.com) > Vickers Consulting Group offers Qmailtoaster support and > installations. > If you need professional help with your setup, contact them today! > -------------------------------------------------------------------------- > ------- > Please visit qmailtoaster.com for the latest news, updates, and > packages. > > To unsubscribe, e-mail: qmailtoaster-list- > unsubscr...@qmailtoaster.com > For additional commands, e-mail: qmailtoaster-list- > h...@qmailtoaster.com > --------------------------------------------------------------------------------- Qmailtoaster is sponsored by Vickers Consulting Group (www.vickersconsulting.com) Vickers Consulting Group offers Qmailtoaster support and installations. If you need professional help with your setup, contact them today! --------------------------------------------------------------------------------- Please visit qmailtoaster.com for the latest news, updates, and packages. To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com For additional commands, e-mail: qmailtoaster-list-h...@qmailtoaster.com
