Clarification on that, the default settings will work with Qpopper if you are just sending userid. If you have Qpopper ignoring the domains (like I do) and the users are sending [EMAIL PROTECTED], then smtp auth will fail (unless you add a hack), the users will need to send only login and password (no domain)
-----Original Message----- From: Daniel Senie [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 05, 2003 11:13 PM To: Donald Clouse; Subscribers of Qpopper Subject: Re: Relaying Denied At 09:06 PM 2/5/2003, Donald Clouse wrote: >Alex, >Thank you. Do you know where I could get info on how to configure the >POP-before-SMTP solution? I am running sendmail. > >I can both POP and SMTP on the LAN but someone coming in outside the lan >fails......is this sheds any further light on my problem. I'd urge you to first try to implement SMTP AUTH. While the smtp-after-pop approach does function, users do not "get it" very well, and you'll get lots of support calls. Based on your error message in your original posting, your users are using Outlook or Outlook Express. Both support SMTP AUTH just fine, so use it! You turn it on by clicking a check box on the Servers config tab that says "my server requires authentication." The default settings work. >Thanks Again. >Don >----- Original Message ----- >From: "Aleksandr Melentiev" <[EMAIL PROTECTED]> >To: "Donald Clouse" <[EMAIL PROTECTED]>; "Subscribers of Qpopper" ><[EMAIL PROTECTED]> >Sent: Wednesday, February 05, 2003 6:37 PM >Subject: Re: Relaying Denied > > > > Hello, > > > > This is not qpopper's fault. The user is trying to send email using your > > SMTP server on that box (such as sendmail or postfix) and it prohibits >users > > from sending mail remotely for security reasons. If this is an issue and >you > > would like to let users send email via your server, consider setting up > > some kind of authnetication... most popular choices would be >POP-before-SMTP > > system and SMTP AUTH. > > > > Hope this helps. > > Alex. > > > > ----- Original Message ----- > > From: Donald Clouse > > To: Subscribers of Qpopper > > Sent: Wednesday, February 05, 2003 4:48 PM > > Subject: Relaying Denied > > > > > > Hello All, > > I have qpopper running on a RH 8.0 linux box. > > When one of the pop3 users comes into the box to check their email they >get > > the message: > > > > Server: IP Address Port 25 SMTP Server error 550 5.7.1 > > Relaying Denied Secure SSL Server error 550 > > Err 0x800cc79 > > > > Any Ideas on why a user on the box would be denied the sending of any > > outgoing email? > > > > Thank You. > > > > Don > > Your ISP has scanned this email for Viruses and Spam Control. Your ISP has scanned this email for Viruses and Spam Control.
