Hank Kohl K8DD <[EMAIL PROTECTED]> made an utterance to the qrplist gang
----------------------------------------------------------------------
Thom R LaCosta wrote:
Thom R LaCosta <[EMAIL PROTECTED]> made an utterance to the qrplist gang
----------------------------------------------------------------------
OK...I'm dumb about a lot of stuff...maybe I can get some help.
I have a very antenna compromised location....it's a row(town)house
that's 11 feet wide, 25 feet long and a 10 foot deep yard.
So...if I can get on the roof, I can play with end endfed wire...or
a really short loop, or maybe a vertical.
Is there any advantage/disadvantage of creating an rf ground by
laying out chicken wire mesh over the roof? I'm getting ready to
use a cold coat on the roof...and can lay down the wire, if it will
help.
thanks
Thom
I would lay the chicken wire or something like that down all over the roof.
Or a bunch of runs of copper wire just laying there and put the "stuff"
over it.
Either way. Personally I would not care if it was any resonant length -
long enough
to go from the vertical mount to every edge of the roof, if it is
wires. As many
as possible.
73 Hank K8DD
----------------------------------------------------------------------
Submissions: [email protected]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe qrplist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: http://www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
