Dan, There are ways to divide that into two. If your bed is a king size then you can simply get one of the alternating mattresses on the other side and a twin mattress for your wife's side of the bed.
I left out a long time ago and found a very good low air loss mattress for about 150 bucks, but I did see some mattresses which are similar. I, unfortunately, cannot testify to the effectiveness of these systems, but I saw some on eBay and some other sites which were reasonably priced. One of them was for around $250. I purchased one of the small overlays that does alternate and while it is very effective, it is quite a flimsy product. Many of those can be purchased for $60-$80. Quadius On Tue, Jul 13, 2010 at 12:02 PM, Danny Hearn <[email protected]> wrote: > thank you for explaining what works for you Greg---sounds like a pretty > smart idea that works for you, that goes to show how different things work > for different quads.. i'm having so much neuologic problems that i'm > thinking of the alternating air---not sure if anything can help or not but > gotta try--thanks again-- Danny H. > > ------------------------------ > *From:* greg <[email protected]> > > *To:* [email protected] > *Sent:* Tue, July 13, 2010 9:44:58 AM > *Subject:* [QUAD-L] Air Mattress / Turning > > I'm sure you can get one. The alternating air mattress I had used while > empty was just a flat plastic thing that laid over my mattress. You could > just lay it on your side of the bed. I've also seen queen/king size beds > that have individual remotes to raise/lower just your side of the bed. > Since my injury I have not been turned at night. It's worked for me so far. > I have a 6 inch thick foam mattress on top of my regular mattress. I cut > like a 20 inch square out where my butt goes. Then I cut like 3 inches off > the top of that square and put it back in place. I then cut a 2 inch thick > piece of egg crate mattress to fit in the square. I then put a 1 inch thick > gel square piece on top of that (I got the gel on-line, supposed to be for a > wheelchair cushion.) Because the square area can sink in more than if it was > a solid mattress, it takes lots of pressure off. I sleep with my legs turned > slightly with a pillow under my bottom knee and one between my knees. That's > it. I sometimes turn the other way and sometimes just flat on my back. > > Greg > > --------- > Why a full Wheel?? that is one thing I was wondering about---Right now I > sleep in bed beside my wife on a regular queen bed, she turns me once or > twice a night, but my circulation is slowly getting worse and turning me is > hard on her. I'm not sure if I may need to go in a hospital bed > eventually--would be nice to be able to have a bed that could let me set-up > in bed (adjustable) We are wondering if I get a alternating air mattress > for just my half of the bed , if that would work?? thanks, Dan H. >

