Hell everyone, There is a gre network with ospf. I use Quagga ospfd connect with other OSPF equipment, but the route cannot learn from peer OSPF equipment. This is ospf database log, does anyone know if the Link ID 0.0.0.0 is the reason causes route cannot be established? =========================================================== 530> show ip ospf database
OSPF Router with ID (172.16.2.254) Router Link States (Area 0.0.0.0) Link ID ADV Router Age Seq# CkSum Link count 172.16.1.248 172.16.1.248 441 0x80000e27 0x9e87 3 172.16.1.249 172.16.1.249 1312 0x80000de9 0x1a64 1 172.16.2.254 172.16.2.254 436 0x80000008 0x9271 4 Net Link States (Area 0.0.0.0) Link ID ADV Router Age Seq# CkSum 26.26.26.1 172.16.1.248 440 0x80000001 0x904f 172.16.1.249 172.16.1.249 411 0x80000dbf 0xefc0 AS External Link States Link ID ADV Router Age Seq# CkSum Route *0.0.0.0 172.16.1.248 345 0x80000dcc 0xdc67 E2 0.0.0.0/0 <http://0.0.0.0/0> [0x0]* *0.0.0.0 172.16.1.249 1242 0x80000dc3 0xe863 E2 0.0.0.0/0 <http://0.0.0.0/0> [0x0]* 10.10.101.0 172.16.1.248 1425 0x800008f7 0x3f65 E2 10.10.101.0/24 [0x0] 10.10.101.1 172.16.2.254 436 0x80000006 0xf60c E2 10.10.101.1/32 [0x0] 10.10.104.0 172.16.1.248 705 0x8000071b 0xdaa4 E2 10.10.104.0/24 [0x0] 10.10.112.0 172.16.1.248 1425 0x800008f7 0xc5d3 E2 10.10.112.0/24 [0x0] 10.20.30.0 172.16.1.248 345 0x8000014f 0x3d54 E2 10.20.30.0/24 [0x0] 172.16.0.0 172.16.1.248 525 0x80000dc4 0x6728 E2 172.16.0.0/24 [0x0] 172.16.0.0 172.16.1.249 1242 0x80000dc3 0x632c E2 172.16.0.0/24 [0x0] 172.16.30.0 172.16.1.248 525 0x80000dc4 0x1c55 E2 172.16.30.0/24 [0x0] 172.16.30.0 172.16.1.249 1242 0x80000dc3 0x1859 E2 172.16.30.0/24 [0x0] 172.16.255.0 172.16.1.248 1245 0x8000014e 0x7899 E2 172.16.255.0/24 [0x0] 192.168.137.0 172.16.1.248 345 0x800008fe 0xec37 E2 192.168.137.0/24 [0x0] 192.168.137.0 172.16.1.249 1242 0x800008f8 0xf236 E2 192.168.137.0/24 [0x0] =========================================================== This is our configure log, does anyone knows how to fix and let route be established? Our ospfd conf: ========================================= password zebra ! access-list vty permit 127.0.0.0/8 access-list vty deny any ! line vty access-class vty ! ! interface br0 ip ospf cost 1 ip ospf priority 1 ! interface gretunnel ip ospf cost 10 ip ospf priority 1 ! router ospf network 172.16.2.0/24 area 0 network 26.26.26.0/24 area 0 redistribute connected redistribute kernel ! log syslog ========================================= Other OSPF equipemnt: ========================================= ip service all ip interface "v1" address 172.16.1.248 mask 255.255.255.0 vlan 1 ifindex 1 ip interface "v101" address 10.10.101.1 mask 255.255.255.0 vlan 101 ifindex 2 ip interface "gre_soushan" address 26.26.26.1 mask 255.255.255.0 tunnel protocol gre source 10.10.101.1 destination 10.10.104.1 ifindex 5 ip load ospf ip ospf area 0.0.0.0 ip ospf interface "gre_soushan" ip ospf interface "gre_soushan" area 0.0.0.0 ip ospf interface "gre_soushan" status enable ip ospf interface "v1" ip ospf interface "v1" area 0.0.0.0 ip ospf interface "v1" status enable ip ospf status enable ip route-map "LOCAL4_OSPF_1" sequence-number 1 action permit ip route-map "LOCAL4_OSPF_1" sequence-number 1 match ip-address 0.0.0.0/0 redist-control all-subnets permit ip route-map "LOCAL4_OSPF_1" sequence-number 1 set metric 1 effect none ip redist local into ospf route-map "LOCAL4_OSPF_1" status enable ip redist static into ospf route-map "LOCAL4_OSPF_1" status enable ========================================= Thanks James Chan
_______________________________________________ Quagga-dev mailing list Quagga-dev@lists.quagga.net https://lists.quagga.net/mailman/listinfo/quagga-dev