I made some progress. I found that I was pointing pimd at an interface that didn't have an IP address. When I switched to the bridge interface containing the physical interface and the bridge has an IP address, I started seeing PIM traffic in both directions.
On 9/6/19 11:00 AM, Jon SCHEWE wrote: > I've been using Quagga ospfd without issue. I'm now trying to do > multicast routing and setup of pimd. However I'm having problems getting > my configuration correct. I've got pimd up on a couple of my nodes, but > I'm not seeing PIM traffic both directions between the nodes. I'm only > seeing PIM traffic in one direction, so I assume I'm missing something > in my configuration. > > The configuration on my nodes looks like this. I specify the network > interfaces that each node should be sending or receiving multicast on. > > hostname nodeA0 > password zebra > log file /var/log/quagga/pimd.log > > ip multicast-routing > > interface eth1.21 > ip pim ssm > ip igmp > > interface eth1.16 > ip pim ssm > ip igmp > > > Can someone give me some ideas for debugging this? > > Thank you, > Jon Schewe > -- Research Scientist Raytheon BBN Technologies 5775 Wayzata Blvd, Ste 630 Saint Louis Park, MN, 55416 Office: 952-545-5720 _______________________________________________ Quagga-users mailing list Quagga-users@lists.quagga.net https://lists.quagga.net/mailman/listinfo/quagga-users