Andy, My thought is that the 1.8 Zetec should be almost exactly the same as the 2.0 to fit as the blocks are the same size etc. Not having done this I'm not best qualified to answer, but would have thought that a 2.0 would be better as there would be more torque/power off boost. Having had a week away in my laggy H4, more power and torque off boost would make the car more drivable, however, once on boost it's a different story :D
Regards, Steve On Friday 12 Sep 2008, Andy Haworth wrote: > Anyone have any thoughts on this? > > Andy > _____ > > From: Andy Haworth [mailto:[EMAIL PROTECTED] > Sent: 10 September 2008 14:23 > To: '[email protected]' > Subject: 1800 ZVH Turbo? > > The FRST EFi CVH looks like it's short life in my 2+2 will be coming to > an end soon. It's going to need a new head courtesy of a cross threaded > plug, and it's developed a bottom end noise I'm not happy about. Looks > like it's easier to swap than repair. > > Trawling the breakers and forums for replacements has turned up a few > CVH's of varying condition, but more Zetec and ZVH than anything. > > That got me thinking - I'd quite like to keep the car turbo'd with the > T25 as not only is that fairly new, there's a brand new rad, intercooler > and exhaust just gone on, and have already sourced a decent replacement > FRST head. To top that, I dont like the sound of chopping up the > spaceframe. > > I'm not in search of massive power, so I'm also looking at 1.8 Zetec > blocks. Assuming appropriate ZVH turbo conversion on the pistons and > rods, together with oilways blocked off and an appropriate flywheel, > would I have any space problems or issues with the mounting? > > And could I re-use my OFAC loom and ECU? > > I've done some reading up, but everything points me towards modifications > needed on the 2.0/2.1 and I'm not sure how relevent that would be to me > if I just want the 1.8 block with a turbo CVH head > > Thanks in advance > Andy -- www.h4-turbo.co.uk --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
