I presume you've seen my web site at www.quantums.info The 1.8 is pretty much the same as the 2.0 except you can still use the 1.6 cvh head gasket and the compression ratio is a little higher as the 1.8 pistons go 0.5mm above the block at TDC whereas the 2.0 is flush. The Ford ecu may cope with the 1.8 but a rolling road session is the only way to be sure. Use a 130ps block rather than the 105ps as that dosn't have the piston coolling jets. And make sure it from a Fiesta or Escort rather than a Mondeo.
Jim Andy Haworth wrote: > > Anyone have any thoughts on this? > > > > > > Andy > > > > ------------------------------------------------------------------------ > > *From:* Andy Haworth [mailto:[EMAIL PROTECTED] > *Sent:* 10 September 2008 14:23 > *To:* '[email protected]' > *Subject:* 1800 ZVH Turbo? > > > > The FRST EFi CVH looks like it's short life in my 2+2 will be coming > to an end soon. It's going to need a new head courtesy of a cross > threaded plug, and it's developed a bottom end noise I'm not happy > about. Looks like it's easier to swap than repair. > > > > Trawling the breakers and forums for replacements has turned up a few > CVH's of varying condition, but more Zetec and ZVH than anything. > > > > That got me thinking - I'd quite like to keep the car turbo'd with the > T25 as not only is that fairly new, there's a brand new rad, > intercooler and exhaust just gone on, and have already sourced a > decent replacement FRST head. To top that, I dont like the sound > of chopping up the spaceframe. > > > > I'm not in search of massive power, so I'm also looking at 1.8 Zetec > blocks. Assuming appropriate ZVH turbo conversion on the pistons and > rods, together with oilways blocked off and an appropriate flywheel, > would I have any space problems or issues with the mounting? > > > > And could I re-use my OFAC loom and ECU? > > > > I've done some reading up, but everything points me towards > modifications needed on the 2.0/2.1 and I'm not sure how relevent that > would be to me if I just want the 1.8 block with a turbo CVH head > > > > Thanks in advance > > > > > > > > Andy > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
