It's probably a short between the up (normally closed) and down (normally open) outputs from the relay, or the wires from there to the motor. Maybe the engine place had to unplug the wires and put them back on the wrong place.
Jim Andy Haworth wrote: > Thanks Jim, > > It's doing it constantly, or was doing it for a good few minutes til I > turned the ignition off > > I've disconnected the metal connectors for now and dropped them down so I > could drive it home in the dark last night. > > > Andy > > -----Original Message----- > From: [email protected] [mailto:[EMAIL PROTECTED] > On Behalf Of Jim Hearne > Sent: 11 November 2008 15:45 > To: [email protected] > Subject: [Quantum Owners] Re: 2+2 headlamp "flaps" go mad > > > Only when the lights are on or always ? > > Jim > > > Andy Haworth wrote: > >> Picked the 2+2 up from it's latest engine build (stuck with turbo and >> managed to get the old block rebored in the end) >> >> Anyway, the headlight flaps are as excited as I am about it, and >> continually go up and down in celebration. This has happened before on >> my old 2+2, and I think I changed a relay and it stopped doing it. It >> may have been coincidental >> >> Does anyone know why this happens? >> >> TIA >> >> >> Andy >> >> >> > > > > > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
