Neil, >From memory there is no relay, but I think using a suitable relay to remove the load from that connector would solve your issue.
As an aside I tend to burn out the ignition relay (green) in my H4 and have been meaning to remove some of the load by switching the fans with a additional relay. Regards, Steve On Saturday 04 Jul 2009, barnacle wrote: > I haven't checked yet to see whether there should be a relay in the > circuit, or if the switch is intended to to manage the fan current > directly, but with my electronic engineer's hat on I'd say this is > evidence of overheating and failure due to excess inductive loads. -- www.h4-turbo.co.uk --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
