Thats a problem with the wires insulation, not the connector. I've seen Fords where the insulation has gone hard and cracked on pretty much every wire in the engine bay but yet others of the same age are fine. Maybe too much use of engine cleaner in the past had affected the insulation.
Soldering wires directly to the switch is lightly to damage it. Jim >> >> Water often gets into the connector when the insulation cracks on the 2 >> wires. >> > > ....which suggests to me that they're far from fine for the job > considering where they are! :D > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). -~----------~----~----~----~------~----~------~--~---
