We're getting a very bad idle with the Zetec in Carole's 2+2. With the idle speed control valve connected from cold it will idle nicely at around 1000rpm, if just left to idle and warm through. However if you rev, or drive that car the best idle to can get is between 2-3,000 rpm, which isn't great :( The car also drives badly, having hesitation and then you fight the engine on the over run.
It is a lot better with the ISCV disconnected, but still not great. The idle is still a bit high, being around 1,200 rpm and it still doesn't drive that great. We've tried resetting the ECU to re-program it and Geoff's cleaned all the electrical contact and the ISCV. Any ideas what else needs to be done to get this ready before the HHII? Regards, Steve -- www.h4-turbo.co.uk www.quantumowners.co.uk www.quantumcars.co.uk www.quantumheritage.co.uk -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).