having trouble finding the answer to this, and ive asked in 4 places so far
could you guys take a look at your Y pieces in the heater matrix circuit and tell me which way they go please? in my wisdom when i replaced the matrix last year i used a T piece as it looked better and the pipes fell in the right position, but i only get warmth through the matrix when the stat is closed (presumable because there is more pressure) but when the engine warms up it all go's cold inside, presumable because I've put the T piece with the straight edge going across the manifold and the single leg going to the union into the manifold, i guess that the Y piece single leg goes to the manifold and the 2 closer legs go to the 16mm heater hosed? any info much appreciated, a picture even more so. -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s).
