I was about to search for my parts list, and then saw the end of your note! 
That is a distant memory, but I guess after 14 years it would have been a 
miracle if I'd remembered the part number.
Martin
  ----- Original Message ----- 
  From: Jim Hearne 
  To: quantumowners@googlegroups.com 
  Sent: Sunday, August 09, 2015 7:28 PM
  Subject: Re: [Quantum Owners] Re: Rear Anti - roll bar bush bracket.


  Some research on Microcat.

  Non XR2 anti roll bars are 12mm dia, the XR2 is 14mm
  The Mk2 Fiesta clamp is the same part number for both sizes so the outer bush 
size must be the same.

  The clamps aren't from a Mk3/4 Escort , they are P shaped.

  The Mk3 Fiesta clamp for the front anti roll bar looks right.
  The Mk3 Fiesta has different part numbers for the clamp for different sizes 
of anti roll bar but, the finis code for the Mk3 Fiesta clamp for a 12mm anti 
roll bar is 6169163, or old Ford code 89FB5488AA
  That would be my best guess for the part.

  I tried look for the part number on my 2+2 as it would be stamped into the 
bracket but there's too much paint on it.

  Unfortunately there are no Mk3 clamps on ebay that i can find.

  You could try your local Ford dealer with those part numbers, they may still 
have them.
  Take the existing clamp and bush with you so you can compare it.


  After doing all that, i remembered the i had an archive of the old 
Smartgroups message base (what the group was on before Google) and a quick 
search revealed:

  " I can confirm the rear anti roll bar bracket (bolts through floor and holds 
anti roll bar bush) is part number 89FB-5488-AA (Finis No 6169163). This part 
fits the bush perfectly, is better than using the original part with extra tab 
welded on, and at £1.74 each will not break the bank. Just out of interest- the 
part is actually for the front anti roll bar of a 89-95 Fiesta. Martin Scott"
  From 2001.

  Jim



  On 09/08/2015 17:43, Glyn Scoltock wrote:

    Hello everyone



    I am back with some questions concerning which size bushes to use on 
Kitty`s rear anti-roll bar . After some difficulty I have located some 
universal ones that are supplied with bushes but at 
    36 pounds a pop I will not be ordering a number of sets in assorted sizes 
on spec.
    Does anyone know where a good place to look for these brackets? I have 
since found that on some sites they are listed as clamps but so far no mk3 or 4 
clamps are listed. Can I contact Quantum classic and ask them what they fitted 
to the rear antiroll bar on Q2-098 ?
    Thank you all for your previous advice and support. I am off now to wrestle 
with the interweb and I hope you know some of the answers to my questions. I 
really need that clamp.


    ALL THE BEST 


    Glyn Scoltock

    n Thursday, 6 August 2015 08:25:42 UTC+1, Glyn Scoltock wrote:
      Hello everyone


      I am back asking for advice once more. 
      My 2+2 Kitty (Q2-098) is at the garage for its MoT waiting for me to 
locate a couple of bushes and the brackets to attach them to the car. These are 
for the rear anti-roll bar , the existing ones being too corroded to use.
      By the way ,what size are the actual bushes? Looking at a number of 
websites they are offered for the Fiesta Mk2 in a variety of different sizes. 
However no sign of the fitting brackets , should I be looking for flanges or 
something?
      Well ,if anyone has any idea where I can get them I would be relieved and 
delighted to hear.


      ALL THE BEST


      Glyn Scoltock






    -- 
    -- 
    You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
    To post to this group, send email to quantumowners@googlegroups.com
    To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
    For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en
     
    IMPORTANT NOTE: All information presented herewith is provided on an "As 
Is" basis, without warranty or the implication thereof. Neither the Quantum 
Owners Club nor the individuals associated with the Quantum Owners Club or in 
the preparation of the above information shall have any liability to any person 
or entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
    --- 
    You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
    To unsubscribe from this group and stop receiving emails from it, send an 
email to quantumowners+unsubscr...@googlegroups.com.
    For more options, visit https://groups.google.com/d/optout.

     

    No virus found in this message.
    Checked by AVG - www.avg.com
    Version: 2015.0.6125 / Virus Database: 4401/10406 - Release Date: 08/09/15




  -- 
  -- 
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
  To post to this group, send email to quantumowners@googlegroups.com
  To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
  For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en
   
  IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
  --- 
  You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
  To unsubscribe from this group and stop receiving emails from it, send an 
email to quantumowners+unsubscr...@googlegroups.com.
  For more options, visit https://groups.google.com/d/optout.

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to