It should just be the 2 pin connector on this page. http://www.vehicle-wiring-products.eu/section.php/213/1/junior-timer-connectors
Then you need some of the female crimp contacts and a rubber boot. The only problem you might have is with crimping the new crimps. If you’ve not got the correct tool then you can close them with pliers but you will need to solder the wire as well to be sure of a good connection. And if there is any corrosion on the end of the wires they will be a bugger to solder into the crimps. Don’t be tempted by the pre-wired connectors though as the crank sensor wire needs to be screened. If you use unscreened wire you will have all sorts of problems with the crank sensor picking up electrical noise and giving spurious triggers. Jim From: 'Jim Turner' via Quantum Owners Group Sent: Thursday, July 21, 2016 5:53 PM To: Quantum Owners Group Subject: [Quantum Owners] Re: Crankshaft Sensor Thanks Jim. i assumed that it would be a Ford specific part to maximise profit! I don't suppose you know which one it is? I'm a bit wary of removing the origional without a replacement in case it falls apart. Regards JimT On Monday, 18 July 2016 17:37:10 UTC+1, Jim Turner wrote: Hi All Does anyone have, or know where I can get, a connector for the crankshaft sensor on a CVH XR2i. My local Ford dealer (Acorn) who is normally magic at sourcing obscure parts,e-bay, & breakers can't help. JimT -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.