Don't fancy cutting springs, not an option to me thanks.

On Thursday, 30 March 2017 04:33:33 UTC+1, Tom Walker wrote:
>
> I played around with lowered and uprated springs on mine (16" wheels) and 
> ended up going back to standard xr2 on the front and standard fiesta on the 
> back, but on the back i cut out half a turn to lower it a small amount.
>
> You could probably lower the front in the same way, but be careful as it 
> is a lot more difficult to put the spring back together again if you take 
> too much off. ;-)
>
>
>
> On 29 Mar 2017 9:52 pm, "calum mcpherson" <calma...@hotmail.co.uk 
> <javascript:>> wrote:
>
>> I've recently changed my wheels 15" with 195-50-15 tyres to the correct 
>> set up 14" with 185-55-14, and my 2+2 looks like a Land Rover. 
>> I was going to change springs anyway, but now have brought this job 
>> forward as not looking as I want.
>> I understand that the manual states 'Quantum red springs' for front and 
>> Fiesta mk2 1100 springs for rear, however when looking at lowering springs, 
>> most seem to be a standardised Fiesta mk2 set up , most covering full range 
>> excluding XR2 !!!!
>>
>> Anyone got any experience with lowering springs , any recommendations 
>> would be great .
>>
>> Car has std. XR2 engine set-up, thanks.
>>
>> -- 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Quantum Owners Group" group.
>> To post to this group, send email to quantu...@googlegroups.com 
>> <javascript:>
>> To unsubscribe from this group, send email to 
>> quantumowner...@googlegroups.com <javascript:>
>> For more options, visit this group at 
>> http://groups.google.com/group/quantumowners?hl=en
>>  
>> IMPORTANT NOTE: All information presented herewith is provided on an "As 
>> Is" basis, without warranty or the implication thereof. Neither the Quantum 
>> Owners Club nor the individuals associated with the Quantum Owners Club or 
>> in the preparation of the above information shall have any liability to any 
>> person or entity with respect to liability, loss, or damage caused or 
>> alleged to be caused directly or indirectly by the instructions contained 
>> within this or related message(s).
>> --- 
>> You received this message because you are subscribed to the Google Groups 
>> "Quantum Owners Group" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to quantumowner...@googlegroups.com <javascript:>.
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
-- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To post to this group, send email to quantumowners@googlegroups.com
To unsubscribe from this group, send email to 
quantumowners-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/quantumowners?hl=en

IMPORTANT NOTE: All information presented herewith is provided on an "As Is" 
basis, without warranty or the implication thereof. Neither the Quantum Owners 
Club nor the individuals associated with the Quantum Owners Club or in the 
preparation of the above information shall have any liability to any person or 
entity with respect to liability, loss, or damage caused or alleged to be 
caused directly or indirectly by the instructions contained within this or 
related message(s).
--- 
You received this message because you are subscribed to the Google Groups 
"Quantum Owners Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to quantumowners+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to