That's a good question, that I don't know the answer to as I've got the pedal but haven't got around to fitting it! Did you buy your cluitch as a complete kit? It could be a mismatch on parts as Jim has alluded to. My clutch has a disengagement problem (having worked ok for some 20k miles) - I suspect the the 'fingers' on the clutch plate have lost their strength. We had the same problem 20 years ago on Ford Escort, and replacing the complete clutch cured it. We also had the same problem on a Fiat Grande Punto we bought from new, after only 8k milesand it was replaced under warranty. Other clutches have lasted in excess of 100k miles. Anyway, on my Q I replaced the quadrant with a larger (55mm?) diameter one and then a new cable - I then looked at what was happening at the clutch lever end, and it became clear the quadrant or cable couldn't be the issue because when the pedal was fully depressed the clutch arm was only about 2mm from hitting the gearbox casing. I'll have to get around to changing the clutch, but must get the body painting finished (weather permitting). Martin ----- Original Message ----- From: 'Chris Fairlie' via Quantum Owners Group To: quantumowners@googlegroups.com Sent: Monday, September 03, 2018 8:15 PM Subject: RE: [Quantum Owners] Re: Help needed with a 2+2 clutch problem
Thanks Chris. After Jim’s post I removed a layer of carpet and some sound deadening material from behind the clutch pedal. That made no difference. So I managed to get the pedal box out tonight and the quadrant works fine on the bench, but wasn’t in the car. Is it a white 50mm quadrant part number 88AB7L353AA made in 1995 so someone changed it out well after the car was built. Sill cannot understand why it won’t work now. Martin This is an interesting thought, does the manual adjust pedal need a specific quadrant? Regards Chris From: quantumowners@googlegroups.com [mailto:quantumowners@googlegroups.com] On Behalf Of Susan and Martin Scott Sent: 03 September 2018 16:28 To: quantumowners@googlegroups.com Subject: Re: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Hi Chris, The complete clutch kit I used was part FINIS #5024280 It is possible to use a manual adjust clutch off an Escort part #1029012 Martin Scott ----- Original Message ----- From: chris.quant via Quantum Owners Group To: quantumowners@googlegroups.com Sent: Monday, September 03, 2018 3:28 PM Subject: Re: [Quantum Owners] Re: Help needed with a 2+2 clutch problem I’m pretty sure the recommended quadrant colour was white. Chris G From: 'Chris Fairlie' via Quantum Owners Group Sent: Sunday, September 2, 2018 9:44 PM To: quantumowners@googlegroups.com Subject: RE: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Thanks Jim Just had a look and there was a flattened vertical lin in the carpet behind the pedal, I removed the carpet and sound deadening behind it. I managed to lift the pedal and pull the cable out fully, but cannot get the pawl to engage with the quadrant. Looks like I need to take the pedal box out to investigate further. Wasn’t there a recommendation to replace the Fiesta quadrant with a different one, perhaps Escort. I think there was a specific coloured Ford item, but I can’t remember the details. Chris From: quantumowners@googlegroups.com [mailto:quantumowners@googlegroups.com] On Behalf Of Jim Hearne Sent: 02 September 2018 21:11 To: Quantum Owners Group <quantumowners@googlegroups.com> Subject: [Quantum Owners] Re: Help needed with a 2+2 clutch problem Did you reset the ratchet on the quadrant after you fitted the new clutch ? Lift the pedal up against it's stop with a bit of wood or a second person (this releases the ratchet) and then pull the clutch cable inner out as far as it will go in the engine bay. Release the pedal and then press it a few times, you should hear the ratchet reset. You can't mix low lift and normal lift clutch parts but since you replaced as a set it should be ok. I remember an issue with clutch ratchet not working correctly if you had too much carpet behind the pedal which meant it couldn't be pressed down far enough for the ratchet to be triggered. Jim On Sunday, September 2, 2018 at 7:49:05 PM UTC+1, Chris Fairlie wrote: I thought I had an issue with my 2+2 clutch as the bite point was rather high and it would start to slip as soon as I started to press the clutch pedal. I bit the bullet and took the engine out only to fine the clutch plate wasn’t very worn, but it looks like someone has been riding the clutch as the splines are badly scored by the thrust bearing and some blueing. Not sure it is relevant, but the old clutch was a Motorcraft unit with the friction plate marked ‘Low Lift’ and a white quadrant adjuster fitted. I fitted brand new 3 part Valeo clutch kit hoping this would solve my issues. Wrong! Now the clutch cannot be fully disengaged so I cannot get it into gear. The bite point is about 10mm off the floor. I am using the same clutch cable and the quadrant is untouched. Any ideas please? Thanks Chris Fairlie -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. ---------------------------------------------------------------------------- This email has been checked for viruses by AVG antivirus software. www.avg.com -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
