Hi Robert, It is possible to fit a temp sensor in three places on the Raceline water rail.
1. Just behind the head where the original Mondeo thermostat would have been. I think this is 1/8 NTP. 2. Roughly half way along the rail towards the Thermostat. This thread is much larger 3/8 NTP maybe? 3. At the thermostat. I believe this is normally use for the Fan temp sensor. All are different size threads. Which one are you using? I will look at mine and see if there are nay marks Regards Ken Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: 'robert greig' via Quantum Owners Group <quantumowners@googlegroups.com> Sent: Thursday, September 20, 2018 1:05:01 PM To: Quantum Owners Group Subject: [Quantum Owners] Water Temp Sensor Hello Everyone. I have a black top Zetec from a 2004/5 focus with a Raceline water rail fitted. The water Temp Sensor is not a ford Focus part, its the same ford connecter but the thread and probe bit are a different size. My old Temp Sensor has 16F7 and W715c stamped on it. I am told by Raceline that the thread is R8PNT Dose anyone else have this? As I need a new Sensor but all my attempts keeps coming up with the wrong part. Any ideas where to try next? Regards Robert. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com<mailto:quantumowners+unsubscr...@googlegroups.com>. For more options, visit https://groups.google.com/d/optout. -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
