Dear All, Took off the nose cone today. The inner wheel arch covers that fill the back of the nose cone within the wheel arch are pop riveted on. I did wonder if there is a better way of doing it? The rivets are quite practical and easy enough to reset, so maybe not. But I note that production vehicles now use a plastic clip system for the same job. Rivnuts and dome head bolts seem to be the deluxe version. But maybe they would not last?
What have you done? What is the best? Cheers Derek -- -- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To post to this group, send email to quantumowners@googlegroups.com To unsubscribe from this group, send email to quantumowners-unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/quantumowners?hl=en IMPORTANT NOTE: All information presented herewith is provided on an "As Is" basis, without warranty or the implication thereof. Neither the Quantum Owners Club nor the individuals associated with the Quantum Owners Club or in the preparation of the above information shall have any liability to any person or entity with respect to liability, loss, or damage caused or alleged to be caused directly or indirectly by the instructions contained within this or related message(s). --- You received this message because you are subscribed to the Google Groups "Quantum Owners Group" group. To unsubscribe from this group and stop receiving emails from it, send an email to quantumowners+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/quantumowners/105EFCCE-55FA-471F-BBEC-0E13595CFF17%40gmail.com.
