Thanks, that's a good tip. It was, in fact, because I hadn't connected the output anywhere.
-- Rick On Apr 26, 2011, at 3:33 , Achim Breidenbach wrote: > Hi Rick, > > sometimes QC mess up a certain Input Splitter and its connection and then I > have to delete and rebuild all the connection from and to this Input Splitter. > > But most of the time it is my fault ;-) If the patch in question isn't > calculated at all (because its output value isn't needed for the rendering) > then the inputs don't change either. Check this by switching to the > Debug-Mode while rendering and you can see if the patch is flashing or not. > > Achim > > On 26.04.2011, at 11:07, Rick Mann wrote: > >> I've got a situation where an output port is connected to two different >> input ports. Its output value is showing up on one of the input ports, but >> on the other it shows up as zero. >> >> That second input is a math operation adding the constant 1. But the output >> of this (0 + 1) is also 0. >> >> What's going on here? >> >> TIA, >> Rick >> >> _______________________________________________ >> Do not post admin requests to the list. They will be ignored. >> Quartzcomposer-dev mailing list ([email protected]) >> Help/Unsubscribe/Update your Subscription: >> http://lists.apple.com/mailman/options/quartzcomposer-dev/achim%40boinx.com >> >> This email sent to [email protected] > _______________________________________________ Do not post admin requests to the list. They will be ignored. Quartzcomposer-dev mailing list ([email protected]) Help/Unsubscribe/Update your Subscription: http://lists.apple.com/mailman/options/quartzcomposer-dev/archive%40mail-archive.com This email sent to [email protected]
