W dniu sobota, 3 grudnia 2016 12:21:49 UTC+1 użytkownik Pawel Debski napisał: > Folks, > > I have a PC with two SATA controllers: primary master holds my SDD with > Qubes, while secondary master has CD drive attached. > > When I insert a data CD it gets mounted by dom0 and the files are accessible. > I do not want to open these files in dom0 however. So in the VM Manager I > right click my favourite perssonal-full-sw appVM that I created previously > and select: > > Attach/detach block devices -> Attach dom0:sr0 > > and nothing happens. > > Even more: CD content is still visible in dom0 and /dev/sr0 is still mounted > in /run/media/pdebski/CDTITLE > > How can I better diagnose the problem?
Try using qvm-block -l and then attach the device using qvm-block. If that fails, you can attach the entire sata controller (and not just the drive) -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/1fab03b7-2acf-4ed5-a355-67dcf58e44f4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
