On 03/13/2017 02:02 PM, Steffen Hartmann wrote:
Am Montag, 13. März 2017 06:28:52 UTC+1 schrieb Chris Laprise:
On 03/12/2017 04:47 PM, Steffen Hartmann wrote:
Hello,
after installation and some weeks of using cubes 3.2 I'm still facing troubles
with the system hanging comletly.
It starts with very delayed mouse and keyboard input - finally everything stops.
When looking with top in dom0 no obvious memory hungry tasks.
However I have to reboot or even stop the computer the hard way pulling the
mains.
With my other OS's on the same computer no such troubles.
Where can I look into to trace down this problem?
I have a dell precision 5500 with 16 GB Ram an 3 VM running (sys-firewall,
sys-net, fed23) and dom0 of course.
Everything is pretty much standard installation.
thank you
Hi,
I put all my results between the lines:
Hi,
A little more info could be helpful: CPU model, bios revision, GPU and
current driver
lscpu shows Intel Xeon E5606 @ 2.13GHz
Bios A13
Driver: /sys/bus/pcidrivers/nouveau/0000:03:00.0
GPU: GF108
Did this not work after all... ?
https://groups.google.com/d/msg/qubes-users/avqu_g6PeTM/xOrw75TWAgAJ
No it does not work. However I thought it would since it did not happen for 1
day or so.
Have you run a hardware diagnostic (including RAM and disk)?
Yes, I run memtest and this time I installed on a completely differnet
(externel) USB HD
Do you see anything in 'xl dmesg` or 'dmesg' that look like serious errors?
I don't recognize any error
Does upgrading to ('unstable') kernel 4.8 help?
I did not try 4.8 but I tried from testing repositories 4.4.38-11
Does upgrading to fedora-24 template help?
Not tried yet, but would it stop the complete system when changing templates?
Thank you
I have a feeling its NVIDIA/nuveau that's causing it; notice your
graphics card is different than Drew White's.
A few suggestions:
* Run a full hw diagnostic. This program is usually found in the BIOS
* Try upgrading to the 4.8 kernel; this will update the graphics support
and bring other improvements (I've been using 4.8.9-12 for a long time
now without problems). Use a command like:
sudo qubes-dom0-update --enablerepo=qubes-dom0-unstable kernel
* Try a different graphics card such as AMD Radeon
* Upgrading to fedora-24 (or debian-8) template is less critical for
stability (but recommended anyway). You would have to stop all VMs using
fedora-23 to make the switch.
--
Chris Laprise, [email protected]
https://twitter.com/ttaskett
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/cc00da86-62f5-1fe2-ae0a-4d826b04db9f%40openmailbox.org.
For more options, visit https://groups.google.com/d/optout.
