Moving discussion from qubes-devel to qubes-users: On Thu, Nov 2, 2017 at 3:47 PM, 'Marek Jenkins' via qubes-devel <qubes-de...@googlegroups.com> wrote: > On Thursday, November 2, 2017 at 7:03:12 PM UTC+1, Jean-Philippe Ouellet > wrote: >> >> On Thu, Nov 2, 2017 at 1:13 PM, 'Marek Jenkins' via qubes-devel >> <qubes...@googlegroups.com> wrote: >> > Dear users and devs, >> > >> > I really like Qubes and hope I can make it work. >> > >> > I have severe graphics glitches that happen at random intervals. >> > If they happen I must reboot the system to fix them temporarily >> > (potential >> > data loss). >> > Unfortunately, those issues make Qubes 3.2 unusable for me because I >> > need >> > reliability. >> > >> > Glitch #1: https://imgur.com/a/fkAjW >> > Looks like a green screen to me. Happens mostly when the system was idle >> > / >> > stand-by and I get back to it. >> > >> > Glitch #2: https://www.youtube.com/watch?v=sIaOWpFsdTM >> > Weird screen glitch - also green but with some kind of flickering. >> > Appears >> > randomly. >> > >> > HCL REPORT: >> > >> > (Also attached the files !) >> > >> > --- >> > layout: >> > 'hcl' >> > type: >> > 'desktop' >> > hvm: >> > 'yes' >> > iommu: >> > 'no' >> > slat: >> > 'yes' >> > tpm: >> > 'unknown' >> > brand: | >> > Gigabyte Technology Co., Ltd. >> > model: | >> > Z97X-UD5H >> > bios: | >> > F9 >> > cpu: | >> > Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz >> > cpu-short: | >> > FIXME >> > chipset: | >> > Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] >> > (rev >> > 06) >> > chipset-short: | >> > FIXME >> > gpu: | >> > Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated >> > Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller]) >> > gpu-short: | >> > FIXME >> > network: | >> > Intel Corporation Ethernet Connection I217-V >> > Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 10) >> > Qualcomm Atheros AR93xx Wireless Network Adapter (rev 01) >> > memory: | >> > 32550 >> > scsi: | >> > Samsung SSD 840 Rev: BB6Q >> > DT HyperX 3.0 Rev: PMAP >> > >> > versions: >> > >> > - works: >> > 'FIXME:yes|no|partial' >> > qubes: | >> > R3.2 >> > xen: | >> > 4.6.1 >> > kernel: | >> > 4.4.14-11 >> > remark: | >> > FIXME >> > credit: | >> > FIXAUTHOR >> > link: | >> > FIXLINK >> >> Try updating your kernel in dom0. 4.4.14 is very old and hardware >> support improves over time. >> >> Also, posts like this should probably go on qubes-users instead of >> qubes-devel. >> >> Regards, >> Jean-Philippe > > > > Hi Jean-Philippe, > > thanks for your advice. > > I have read the docs over here regarding kernel updates: > https://www.qubes-os.org/doc/software-update-dom0/ > > So should I simply run the following terminal commands in dom0 ? > > sudo qubes-dom0-update --enablerepo=qubes-dom0-unstable kernel > kernel-qubes-vm > > Also, do I need to enable / specify a repo (e.g. unstable, current-testing, > etc) or can I also use the command like this: > > sudo qubes-dom0-update kernel kernel-qubes-vm > > Thank you for your support ! > > PS: I posted this also in qubes-devel, because I thought this issue is quite > difficult for normal users to solve. > Sorry about that, I have also posted my HCL Report in qubes-users and will > update there if I find a fix ! > > Best regards, > Marek
just start with $ sudo qubes-dom0-update in dom0 and reboot only if that doesn't work then try -testing or -unstable repos. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/CABQWM_BTDOk6g3EUEKF%3DRNfMYnzHoBRQ%3D4xhD%3DpHxoQWdotupg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.