On Thursday, 18 January 2018 20:56:10 UTC, donoban wrote: > On 01/18/2018 11:15 AM, Krišjānis Gross wrote:> I did navigate to /tmp > and looked at some logs. Unfortunately I do not know what to look for > there. Took some screen shots (attached). Does that ring any bells? > > I think the problem is: > > (EE) VESA(0): V_BIOS address 0xaa7a0 out of range > > I've searched a little but I didn't find anything useful. I hope someone > could help you on this. > > > > > A side question- how can I copy the logs in /tmp to a flash drive or > > something in order to post those here? > > > > Which Linux distribution should I try to run in order to do a reasonable > > comparison? > > > > Ideally same as dom0, fedora-24?? I would try to guess what kernel > version starts to work fine with it and compare with built-in the qubes iso.
Thank You for the suggestion! Will check that out. I tried to install Debian 9 on this hardware and all went fine. Only thing that I noticed when installation was finished was that there was a notification that system is running a " software emulated graphics" and therefore CPU usage might be considerably higher. Not sure whether that is relevant though. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/dcfd1e6e-a845-4ecf-ac87-d9b2e3329ce1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
