Chris Laprise wrote on 4/6/19 2:08 PM:
On 3/30/19 3:47 PM, 'awokd' via qubes-users wrote:
Chris Laprise wrote on 3/30/19 7:10 PM:
BTW, like some other Qubers I got a G505s with the AMD A10. Still
need to figure out how to flash it.
Mike Banon's done some great work here. Check out
http://dangerousprototypes.com/docs/Flashing_a_BIOS_chip_with_Bus_Pirate
(pictures are from a G505s) and
http://dangerousprototypes.com/docs/Lenovo_G505S_hacking. My thanks to
Taiidan too for promoting the platform. Feel free to contact me with
any questions, on or off list.
I'm ordering parts from Mike's guide now, but a little confused about
something: If I order reasonably short wires and the advanced clip, will
I need to do any soldering?
Another thing that isn't clear is how power is applied, but I'll cross
that bridge when I get to it. I plan to use a CH341A flasher.
No soldering needed on these laptops with a clip. FWIW, I got away with
12" wires but I was only flashing at 1 or 2 MHz. Power is supplied from
the CH341A through the clip, so pay attention to that warning about 3.3V
vs. 5V.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/a1deccad-18a3-e896-a64e-64723a2744f3%40danwin1210.me.
For more options, visit https://groups.google.com/d/optout.
