duc...@disroot.org: > This is an issue that's been reported before, and some solutions appear > to be out there, including re-installing with Legacy boot. However, they > all seem to involve modifying the installer prior to installation or > making changes via a GRUB menu. I'm never presented with a GRUB menu > with either (I suspect that's a UEFI issue), so I'm not quite sure how > to proceed with troubleshooting. I want to stick with UEFI-only boot as > far as possible. > > The last messages echoed before the black screen are: > >> [VT-D]Passed iommu=no-igfx option. Disabling IGD VT-d engine. >> Scrubbing Free RAM on 1 nodes using 2 CPUs >> .................done. >> Initial low memory virq threshold set at 0x4000 pages. >> Std. Loglevel: All >> Guest Loglevel: Nothing (Rate-limited: Errors and warnings) >> Xen is relinquishing VGA console. > > The screen goes black indefinitely at this point. > > This is a device with only integrated GPU so I suspected this might be a > problem. > > How should I proceed? > Intel integrated GPU usually works well as is. Are you getting the black screen when you boot the installer, or after it completes and reboots?
-- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/5d1285f1-d7b0-8ff9-4abb-dc40e3e9db91%40danwin1210.me.