duc...@disroot.org: > 'awokd' via qubes-users: >> Intel integrated GPU usually works well as is. Are you getting the black >> screen when you boot the installer, or after it completes and reboots? >> > The installer boots just fine, no issues at all. It's only after it > completes and I try to boot Qubes OS proper that I've just installed > that I get this problem. > OK, you should be pretty close then. If you still have Qubes installed on your HDD, try this:
- https://www.qubes-os.org/doc/uefi-troubleshooting/#accessing-installer-rescue-mode-on-uefi - it will tell you where it mounted your HDD, think it's /mnt/sysimage - cd /mnt/sysimage/boot/efi/EFI/qubes - ls should list xen.cfg, nano it - do steps 11 & 12 in https://www.qubes-os.org/doc/uefi-troubleshooting/#cannot-start-installation-installation-completes-successfully-but-then-bios-loops-at-boot-device-selection-hangs-at-four-penguins-after-choosing-test-media-and-install-qubes-os-in-grub-menu If that doesn't help, reboot into Rescue mode and nano xen.cfg again. Remove those mapbs and noexitboot lines, then add efi=attr=uc to the end of each options line (step 5 for "3.2" in https://www.qubes-os.org/doc/uefi-troubleshooting/#system-crashrestart-when-booting-installer). -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/53c5e7a7-6680-5889-1e20-3871673a13f5%40danwin1210.me.
