Dylan: > Hi, I've recently installed Qubes R4 on a IBM X3550 M4 and everything > worked as expected apart from the networking. Originally I thought this > might be a problem with R4 so I upgraded to R4.0.2 but no avail. > > The connection is detected as being plugged in, I've tried manually setting > the IP in sys-net, different switch, router, cable, pretty much anything I > can think of; but it will not connect to the network. > > I then thought it could be a conflict of some type so I removed 3 of the 4 > i350 NIC's pcie devices; but this had no effect either. > > I should add there were no issues during install. > > Any help would be appreciated, thanks. > If using Fedora as your sys-net's template, try switching to Debian. Leaving all 4 NICs assigned to sys-net should work more easily than just one. Check sys-net's journalctl for igb related errors.
If that still doesn't work, try booting a Debian/Fedora Live image on the same hardware and see if the NIC works or if you need additional drivers. -- - don't top post Mailing list etiquette: - trim quoted reply to only relevant portions - when possible, copy and paste text instead of screenshots -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/61d859ea-162f-6d48-907e-06258b6faa3d%40danwin1210.me.