Den Sat, 10 Feb 2007 21:57:27 +0000. skrev Maurice Janssen: > On Sat, 10 Feb 2007 20:56:24 +0100, Rune Magnussen wrote: >>Ok. I will try with an other cable. Perhaps I was just impatient waiting >>for a good signal. The PARSE-driver with mode 2 expects the serial line to >>use 7E2 according to >>http://www.eecis.udel.edu/~mills/ntp/html/drivers/driver8.html > > In that case, you're right. I was just wondering, maybe you used a > terminal program to look at the raw data coming from the C51. > Does it work now?
Still waiting for a stable signal. I am using a printer cable with 9 (female) / 25 (male) connectors. Is that the kind of cable you were thinking of? i started out using an ordinay modem cable but since it did not work at first I started this journey into the RS-232 jungle. /Rune _______________________________________________ questions mailing list [email protected] https://lists.ntp.isc.org/mailman/listinfo/questions
