Marc-Andre Alpers wrote: > "Dave Hart" <daveh...@gmail.com> wrote: > >> The same poster who referred you to the linum.com URL above also >> provided a link to a "Linux Support" PDF. I do not read German >> particularly well, but I did see a reference to parse mode 5, have you >> tried that? > > Yes i have tried mode 5, but then the LED does not flashing. Only in mode > 16 the LED flashes. > > The paper is realy old it refers to xntp and for Suse Linux 6.3 up to 7.3. > In this paper they say that after xntp 4.1.0 the mode 16 is the correct > mode for this clock. XNTP bevor 4.1.0 must be patched with code form > linum. > > The serial port is ok. I have on the same maschine WinXP installed, > and the clocks works correct with other software. I try to use > Meinberg NTPD with this clock, but 127.127.8.1 mode 16 does > not work.
You may want to try radioclkd2 which decodes DCF ok and uses the SHM refclock driver. Radioclkd2 supports signals of either polarity on DCD, CTS, DSR or RNG, also there is debug mode that gives time between pulse edges. From pictures of connector I can't see any connection to RxD which is used as input by PARSE driver, nor does there appear to be a connection to DCD. <http://www.buzzard.org.uk/jonathan/radioclock.html> <http://www.jonatkins.com/page/software/radioclkd2> David _______________________________________________ questions mailing list questions@lists.ntp.org https://lists.ntp.org/mailman/listinfo/questions
