hi there,
Here's my stabs at answering the questions you have.
1. Check in the manual of your keyboard first to see if the numbers for
programs go from 1 to 128, or 0 to 127. If the numbers are 0 based, then these
can be put straight into the definitions for your instruments. However, if the
numbers in the manual start at 1, subtract 1 from each number when putting
these into your definition file.
2. As for the xg synth, check a couple of things. First, is the channel of the
track set correctly? it should be between 1 and 16, with 10 usually for drums.
I often do this myself, and forget to set the channel from 0 in the dialog and
wonder why it doesn't work. If this doesn't work, try a xg reset, found in the
midi menu.
hth,
Arthur.
MR Arthur J. Pirika
You can find many things out about me by reading below this line:
My Live Journal: http://arfy8820.livejournal.com
Free music (for use in MOH systems, podcasts and radio): http://tbrn.net/arfy
The Beyond Radio Network (TBRN:) http://www.TBRN.NET
Online contacts:
Email: [EMAIL PROTECTED]
msn messenger: [EMAIL PROTECTED]
Aim: arfy8820
Telephone contacts:
Home (phone: +64-3-341-1500 - Ext. 54857
Cellular (New Zealand): +64-21-036-0670
In the United States: +1-702-520-5110
Ring the TBRN conference line 24 hours a day! +1-702-520-5123
----- Original Message -----
From: Leonard de Ruijter
To: QWS list
Sent: Thursday, August 09, 2007 4:03 AM
Subject: QWS List a pair of questions,
Hello All,
i have a pair of questions about qws.
1. I'm making an instrument list for my keybord. i got a program number like
this, 001. what should i at to my file, "001" or " 1", the same as in the
other files?
2. I got the yamaha software synthesizer syxg50. when i add the general xg
instruments list to that device, make a track and i change the instrument to
for example church organ, no things will happened and the piano will play, with
all the voices. am i doing something wrong? all the instruments becomes not be
detected.
greatings
leonard,
ps. Sorry for my bad english.
