Thanks for all the feedback I just had to change the channel for the different tracks I wanted and it worked so' thanks again for the advice. Also can I select different keyboards like the motif its and have that keyboards sounds play through the MM8
Once an Eagle Always an Eagle On Aug 2, 2011, at 3:04 PM, "Raymond Grote" <[email protected]> wrote: > Hi Aaron, > When you created the new tracks, did you go into track properties by pressing > enter on the tracks in the list, and make sure that the channels were set to > different numbers. Drum tracks must be on channel 10 if you intend it to have > it played correctly with all GM synthesizers. If you're making it for your > own synth that you are using, and for no other, than you can play with all of > the features of that synth without fear. > HTH > > ----- Original Message ----- From: "Aaron Linson" <[email protected]> > To: "QWS list" <[email protected]> > Sent: Tuesday, August 02, 2011 2:11 PM > Subject: QWS List First time use of qws > > > Hi guys the name is Aaron. I am using a yamaha mm8 and I am finding that i > xan record one track and that's fine. But, when i tey to record another say > basd track the first track becomes the bass and not a seperate track from the > bass track. What do I need to do to fix this? > Thanks, > Aaron > > Once an Eagle > Always an EagleTo unsubscribe or change list options, see > http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
