Look for a "Midi" button somewhere on the front panel. If you have one, press it, and it should work. You will find that in most cases, a GS reset is required for it to get out of a half GM mode. If no such button exists, then you will probably need to consult the manual.
On 10/18/11, Raymond Grote <[email protected]> wrote: > Hi, > Unfortunately, it sounds like your keyboard isn't in multi-timberal mode, or > omni mode, or something like that, I can't remember the term. I never had to > set up such things with my keyboard, it just worked. But some keyboards have > a mode where only one channel plays at a time, and you'll have to switch it > over to the mode where messages from all 16 channnels are taken at once. How > to do this is something else, the manual may explain, but you may need > sighted assistance, unless someone here knows more about it than I do, which > is very probable. > > ----- Original Message ----- > From: Matthew Turner > To: QWS list > Sent: Monday, October 17, 2011 7:05 PM > Subject: QWS List setting up midi with the roland rd 300gx > > > hi I’m trying to set up midi with the rd300 gx an qws I can’t seem to > figure out how to put the keybord in to where it will except midi messages > on all channels any1 no how this can be done? To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
