Hi Seth,
Aha, I think you need the Pitch Bend Range MIDI message.
It's one of the Registered Parameter Number (RPN) messages so it's a little
more complex than a single ordinary controller.
Here's the MIDI messages you need:
CC#101: 0
CC#100: 0
CC#6: value
So, that's controllers 101 and 100, both set to 0, then controller 6 will
set the pitch bend range. I think you can set it value between 0 and 24.
For more about how this works, have a quick search on the web for "MIDI RPN
pitch bend" and you should find it.
So, in QWS, Event list, you need to:
Insert three Control Change messages.
Set the first one to Number 101; the second Number to 101; the third Number
to 6.
Set the Value of the first and second to 0; set the Value of the third to
the pitch bend range you want.
Finally, to avoid problems, I suggest moving the CC#6 message one tick
later.
Technically, after setting an RPN, you should reset CC#100 and CC#101 to
127, so further stray CC#6 values don't mess things up.
I hope this helps.
With best regards,
James.
----- Original Message -----
From: "SethJ" <[email protected]>
To: "QWS list" <[email protected]>
Sent: Tuesday, July 29, 2014 7:14 PM
Subject: QWS List Changing Pitch bend range in QWS event list
Hello, my name is Seth. QWS has been a great addition to my setup,
especially since I have a cheaper keyboard. However, I've had to convert
songs I've recorded in the past to smf1 format, and whenever I do, The
pitch
bend range setting always defaults to 2 semitones. Is there a way to go
into the event list and change the bend range setting? I've tried
changing
it on the keyboard, but when I reenter my midi file after switching the
keyboard off and on, the bend range setting gets reset to it's defalt of 2
semitones. If anyone knows how to fix this, please email me back with the
controller numbers, and or event type I'd use when inserting this event.
Thank you for your time!!!!!!!!!!
Happy sequencing!
Seth
To unsubscribe or change list options, see http://lists.andrelouis.com
for archived list posts, see http://www.mail-archive.com/[email protected]
