Hi Alex, The CC for Chorus is CC#93, and it is also in the Track Properties dialog. Of course, applying a Chorus effect will depend on whether your keyboard supports the message.
An alternative way to simulate such an effect - as you are hinting at is to detune the second copy. Easy way to do that (assuming there aren't any messages that will clash) is to apply a slight pitch bend at the start ... and put it back afterwards! You can manually insert a Pitch Bend message at the start of a track using the Event List or Control Editor. How much pitch bend to apply will depend on your taste and on the pitch bend range setting. The range of the MIDI controller is -8192 to +8191, with 0 being no pitch bend. I hope this helps. With best regards, James. ----Original Message---- From: [email protected] Date: 11/07/2016 6:44 To: "QWS list"<[email protected]> Subj: QWS List Another question Hi James and all! Thanks first for helping me out with this pitch range stuff and for this midi file. I know have another question. Let's say I have a guitar track and want to make another one, so that it sounds, well, like two guitars, then I have two simmilar instruments without any difference. How can I tune one of these guitars so fine, that it dissents from hte other one? Sure, I could use a chorus, but I have no idea to change the chorus type of my tyros with CC or RPM or SysEx. So that's the only way that I can think of at this time. -- Best regards Alex To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
