Hello Ales, Remember, in your manual it will show:
Program, Bank, Name. In the QWS instrument lists, there is an additional column first: the channel. -1 for the channel means, any channel. You might find in the manual that it splits the bank into LSB and MSB values. combine these together into a single bank value: bank = MSB * 128 + LSB I hope this helps. God bless, James. ----Original Message---- From: [email protected] Date: 10/11/2018 6:01 To: "QWS list"<[email protected]> Subj: RE: QWS List Making instrument list Hi again! Why is minus 1 in original list for s550, but in original manual is only 0? Ales -----Original Message----- From: [email protected] <[email protected]> On Behalf Of JAMES BOWDEN Sent: Friday, November 9, 2018 6:55 PM To: QWS list <[email protected]> Subject: RE: QWS List Making instrument list Hello Ales, Please note, I have changed the email subject. To make an instrument list: First, you will need the manual for your keyboard with the data. This is the source of the information. You should be able to download this from the internet if you do not already have the manual. As you are looking at presumably a Yamaha PSR keyboard, you might find it possible to start from one of the existing instrument lists in QWS. Please also read the topic in the QWS manual how to make instrument lists for full information. The format is simple: each line contains MIDI channel,program,bank,name for example: -1, 0,15488,Piano 1 This means any MIDI channel, program 0, bank 15488, the instrument is called Piano 1 There are a few lines you should put at the top, mostly comments. Finally, test your instrument list by loading it and checking that everything works. Once you're ready, please send your list to me and I will be happy to add it to the QWS website. I trust this helps. With best regards, James. ----Original Message---- From: [email protected] Date: 09/11/2018 14:34 To: "QWS list"<[email protected]> Subj: RE: QWS List Question in creating tracks Hi, from slovenia! How can I create instrument list for psr s975 keyboard? Ales Kuhar -----Original Message----- From: [email protected] <[email protected]> On Behalf Of Rolan Christopher Faelnar Sent: Friday, November 9, 2018 3:18 AM To: QWS list <[email protected]> Subject: QWS List Question in creating tracks Hello everyone, Greetings! I have a concern. I tried creating the first channel of a song. The driver that I'm using is juno ds. After successfully creating the first track, I tried to proceed to the next track. However, it doesn't have a sound. When I click gm2 reset in the midi sub menu, it will have a sound but a different one. Still I'm using the same driver. What should I do? Thanks in advance, Christopher To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
