Hi Nicole

Thanks so much for responding.

I have found the instructions on the list archive since I posted this question,
So I am busy using a spreadsheet program to input the required
Data from my instrument’s data list.

Another 2 hours and I should be done with the project.

I have a Yamaha DGX640.

Thanks again for responding – so appreciate it!

David


From: Nicole Massey
Sent: Thursday, May 9, 2019 8:16 PM
To: QWS list
Subject: RE: QWS List Instrument definition help again please

Okay, first I need to ask two questions.
1.      Do you have a patch list for the instrument? It can be a list in text 
format or it can be a Cakewalk instrument definition file. (This is the easier 
way if you can get it)
2.      How does your chosen instrument handle bank change commands? If it was 
made before the mid-90's then this isn't a difficult question, it handles them 
using only the MSB. (controller 0) After that you'll find this out on the MIDI 
Implementation Chart in the back of the manual or end of the manual file.
Also, what data resources do you have on your computer? Notepad is a given, but 
do you have Excel? This makes it a *lot* easier but it's not mandatory.

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of David 
Fritz
Sent: Thursday, May 09, 2019 5:29 AM
To: QWS list <[email protected]>
Subject: QWS List Instrument definition help again please

Hi All



Sorry to bother, but due to both my one and only PC and a backup hard drive 
packing up within a week of each other, I have to go through all the pains of 
getting hardware and software setup again on new pc.



Can you please help me with instructions to make an instrument definition file? 
 Saved it, and lost it!



Went to look on the QWS site, but couldn’t find it under articles or FAQ.



Thanks so much



David




 
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
    Virus-free. www.avg.com 
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>


To unsubscribe or change list options, see http://lists.andrelouis.com

for archived list posts, see http://www.mail-archive.com/[email protected]



---
This email has been checked for viruses by AVG.
https://www.avg.com

Reply via email to