No, the HAL series has a problematic design flaw. Best to avoid them if possible. You don't need MIDIYoke for any physical device, the MIDI interface takes care of that. It'll show up in your ports list in QWS.
Sent from my HAL 9000 in transit to Jupiter -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Joe Giovanelli Sent: Friday, June 25, 2021 3:41 PM To: QWS list <[email protected]> Subject: Re: QWS List virtual instruments I have the USB Nto MIDI adapter. I guess the hookup has to be: Medeli controler to computer. Maybe computer to Triton MIDI in. Not sure the computer would send an output that way. I wondered if MIDI Yoke could be used in this way. Right now Midiyoke says it is having its installation interrupted, and I have to start it again. Looks to me that UAC is getting in the way. Proteus Vx says it can't initialize audio. Drivers are fine. Do I need a Hal 10000? Joe On 6/25/2021 11:25 AM, Nicole Massey wrote: > You need a MIDI interface hooked up to your computer. Then you cable the > Triton up and you're good to go. > If there isn't a Triton definition file Instavert can output one from a > Cakewalk definition file. No reason to try to create one by hand. > > Sent from my HAL 9000 in transit to Jupiter > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Joe > Giovanelli > Sent: Friday, June 25, 2021 8:58 AM > To: QWS list <[email protected]> > Subject: Re: QWS List virtual instruments > > Hello, > > S > eth, > > > I am truly sorry for bothering this list with all of my difficulties. I have > a Win 7 machine and will probably try this, using Yoke as the cable. > > > I have an alternate which was just offered me. It's a Triton Rack. I > successfully used that some years ago. If that instrument still works, > I'd like to use it. > > > Question is how to connect it to my computer. I can use my keyboard as a > controler by connecting it to my computer, but how do I send the output > of the computer to the Triton. I suspect there's an intermediary program > needed here. > > > This has been a truly frustrating experience for me, and perhaps those > on this list. > > > Thank your kindness and patience. > > > Joe G. > > On 6/24/2021 1:32 PM, Seth Lowman wrote: >> Well good to know. Maybe I won’t be updating to windows 10 anytime soon if I >> can’t run that on it. Of course, if anybody else has gotten Proteus VX to >> work on windows 10, please chime in. I’ve heard that windows 10 is a huge >> pain in the neck as it is, as Microsoft keeps updating and changing things >> all over the map. The only thing I can think for you to do, Joe, is the try >> running Proteus VX on an older computer if you have one. It runs well on my >> Windows 7 PC, which is mostly what I use for work with QWS. Sadly, my >> Windows 8 machine barely works anymore; it had to travel a lot with me >> while I was in college, and with all the shaking and jostling it took in my >> backpack, it seems to have developed motherboard issues. >> >> God bless! >> Seth >> >> On Jun 24, 2021, at 7:13 AM, Joe Giovanelli <[email protected]> wrote: >> >> Seth, I tried this and there was nothing about running as administrater. I >> am running Win 10 and it may be different from your OS. >> >> >> I still can make Proteus VX run because of problems with audio drivers. When >> I did a search for this program, I found various versions. Maybe I got the >> wrong one. I'm floundering around here and sinking. >> >> >> Someone just offered me a Triton Rack. If it still works, that would bail me >> out of this. >> >> >> I can send instructions from the controler to the computer, but how would I >> connect the computer to the MIDI In on the Triton? >> >> >> Thank you for all your info. >> >> >> Joe G. >> >>> On 6/24/2021 12:53 AM, Seth Lowman wrote: >>> Richard, that looks right. >>> Joe, have you tried running it as administrator? I had some problems with >>> this on my Windows 8 machine if I remember correctly. It gave me an error >>> first time I opened it, so what I did was went into the context menu, >>> (press your applications key or right click the mouse), and chose run as >>> administrator, and it worked. >>> >>> God bless! >>> Seth >>> >>> On Jun 23, 2021, at 6:19 PM, Joe Giovanelli <[email protected]> wrote: >>> >>> ITo unsubscribe or change list options, see http://lists.andrelouis.com >>> >>> for archived list posts, see http://www.mail-archive.com/[email protected] >> To unsubscribe or change list options, see http://lists.andrelouis.com >> >> for archived list posts, see http://www.mail-archive.com/[email protected] >> To unsubscribe or change list options, see http://lists.andrelouis.com >> >> for archived list posts, see http://www.mail-archive.com/[email protected] > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] > > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
