Hi,
I have recently made some adjustments to RSAGA that will allow it to
work under Linux too. I haven't uploaded it to CRAN yet, please try out
this temporary build if you wish:
http://www.environment.uwaterloo.ca/u/brenning/RSAGA_0.9-6.tar.gz
I appreciate your feedback - unfortunately I am not a Unix/Linux user so
I depend on your error reports.
Thanks to Carlos Grohmann for his support with the above adaptation to
Linux.
Cheers
Alex
Tomislav Hengl wrote:
Yes: SAGA runs normally on Linux (I use it also), but you can not use the
command line from R (i.e.
RSAGA) to pass command to SAGA :(
But you can use R to pass command lines to SAGA without RSAGA (i.e. the batch
files):
http://saga-gis.wiki.sourceforge.net/Executing+Modules+with+SAGA+CMD
Tom Hengl
http://spatial-analyst.net
-----Original Message-----
From: Thomas Adams [mailto:thomas.ad...@noaa.gov]
Sent: Friday, July 10, 2009 4:20 PM
To: Tomislav Hengl
Cc: r-sig-geo@stat.math.ethz.ch
Subject: Re: [R-sig-Geo] Slope and Aspect calculations in R
Tom,
Thanks! I have seen your posts and results of some of your work with
SAGA and I am very interested. But, I have been to lazy to this point to
try compiling SAGA for either MacOS X or Linux (is a Linux distribution
available?).
Regards,
Tom
Tomislav Hengl wrote:
Dear Josh, Thomas,
I typically use R+SAGA (R on top!) for such type of analysis (and I do have
access to all
operating
system/software). There must be some good reasons that I am using SAGA (speed,
stability, rich
geomorphometry module etc.)! So do not give up so easy on SAGA.
I especially like that SAGA is fairly efficient in processing big grids, and
the commands are
rather
compact. For example to reproject grids from one to another proj4string, you
only need to set
e.g.:
rsaga.geoprocessor(lib="pj_proj4", 2, param=list(SOURCE_PROJ=paste('"',
proj4string(dem25m),
'"',
sep=""), TARGET_PROJ="\"+proj=longlat +datum=WGS84\"", SOURCE="TWI.sgrd",
TARGET="TWI_ll.sgrd",
TARGET_TYPE=0, INTERPOLATION=0))
*see http://www.geomorphometry.org/R.asp
I remember that somebody did manage to set-up SAGA also under Mac OS
(http://www.saga-gis.uni-goettingen.de/html/index.php?module=pnForum&func=viewtopic&topic=458),
but
I also remember that most of students on our GEOSTAT course used Windows under
Mac OS to run
SAGA. I
am sure that it should be possible to compile SAGA under Mac OS, but somebody
needs to put some
effort to bridge this gap (check also with Olaf Conrad).
Here is more discussion about the same topic from few months ago:
https://stat.ethz.ch/pipermail/r-sig-geo/2009-April/005418.html
cheers,
Tom Hengl
-----Original Message-----
From: r-sig-geo-boun...@stat.math.ethz.ch
[mailto:r-sig-geo-boun...@stat.math.ethz.ch] On
Behalf
Of Thomas Adams
Sent: Friday, July 10, 2009 3:12 PM
To: Josh London
Cc: r-sig-geo@stat.math.ethz.ch
Subject: Re: [R-sig-Geo] Slope and Aspect calculations in R
Josh,
I use R & GRASS together on both MacOS X and Linux without problems.
It's very direct to write a shell script that calls both R & GRASS
within a single script. Writing a R script that calls GRASS may be more
tedious to do what you want. Writing a shell script that calls both may
be the wat to go.
Tom
Josh London wrote:
Thanks for the suggestions so far regarding the use of GRASS or SAGA.
We have considered those options but SAGA doesn't appear available for
MacOS. My understanding is that spgrass6 is more for accessing R
code/functions from within GRASS vs accessing GRASS functions from
within R. We have all our other analysis coded up in R, and just need
these functions to do one part of a bigger process. Maybe I'm
misunderstanding how to use R and GRASS together. I'll do some further
research.
Thanks again
Josh
Josh London wrote:
Hello
We are looking to mimic, in R, the slope (max magnitude difference
between a cell and its neighbors) and aspect (direction of maximum
magnitude difference) functions found in ESRI's Spatial Analyst
package. We were just about to code up the slope function but thought
I would make sure we weren't re-inventing any wheels already out there.
Thanks
Josh
--
Thomas E Adams
National Weather Service
Ohio River Forecast Center
1901 South State Route 134
Wilmington, OH 45177
EMAIL: thomas.ad...@noaa.gov
VOICE: 937-383-0528
FAX: 937-383-0033
_______________________________________________
R-sig-Geo mailing list
R-sig-Geo@stat.math.ethz.ch
https://stat.ethz.ch/mailman/listinfo/r-sig-geo
_______________________________________________
R-sig-Geo mailing list
R-sig-Geo@stat.math.ethz.ch
https://stat.ethz.ch/mailman/listinfo/r-sig-geo
--
Thomas E Adams
National Weather Service
Ohio River Forecast Center
1901 South State Route 134
Wilmington, OH 45177
EMAIL: thomas.ad...@noaa.gov
VOICE: 937-383-0528
FAX: 937-383-0033
_______________________________________________
R-sig-Geo mailing list
R-sig-Geo@stat.math.ethz.ch
https://stat.ethz.ch/mailman/listinfo/r-sig-geo
--
Alexander Brenning
brenn...@uwaterloo.ca - T +1-519-888-4567 ext 35783
Department of Geography and Environmental Management
University of Waterloo
200 University Ave. W - Waterloo, ON - Canada N2L 3G1
http://www.fes.uwaterloo.ca/geography/faculty/brenning/
_______________________________________________
R-sig-Geo mailing list
R-sig-Geo@stat.math.ethz.ch
https://stat.ethz.ch/mailman/listinfo/r-sig-geo
