Hi, Was hopping someone can shed some light on our problem, the story goes like this.....
We are running radiator with platypus billing system and things are working fine on our local ISP system. We recently got into the satellite telecommunications business and decided to put a 2611 router out on a remote site with an 8AM analog modem module to provide access to the data stream and authenticate via radiator/platypus. The data stream is via VSAT satellite equipment ( Basicly a serial at both routers with VSAT equipment between, using HDSL Encapsulation, introduces about 700ms delay round trip ) The strange thing is that i can seem to authenticate from the remote 2611 but there is no call/download information sent back. The radius server and platypus server are local and work fine with our other access servers. Why can it authenticate over the SAT link but not send the billing data back ?? I know the radius server and platypus server are configured correctly because they are accounting for our loacl dialin customers, the router is configured nearly identical to our access servers with regards to CISCO aaa. Any help would be great, i have tried just about everything and dont know where to go next. -- Regards, Marcel Welschbillig ------------------------------------------ Inter-Network Engineer Comdek Limited 673 Murray Street West Perth WA 6005 Ph : (08)9214 5259 FAX: (08)9214 5201 ------------------------------------------ The information contained in this e-mail is confidential and privileged. It is intended solely for the addressee. If you receive this e-mail by mistake please promptly inform us by reply e-mail or by telephoning the phone number listed above and then delete the e-mail and destroy any printed copy ----------- === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.