Hello Marcel -
Thanks for sending the trace. As far as I can see everything is working correctly. Here is what is happening with the accounting requests: Tue Mar 12 05:03:14 2002: DEBUG: Packet dump: *** Received from 202.65.74.130 port 1646 .... Code: Accounting-Request Identifier: 125 Authentic: ]<133><17><253>Hg<186><207><194>jg<216><248><251><159><227> Attributes: NAS-IP-Address = 202.65.74.17 NAS-Port = 33 NAS-Port-Type = Async User-Name = "macmahon" Acct-Status-Type = Start Acct-Authentic = RADIUS Service-Type = Framed-User Acct-Session-Id = "000003A0" Framed-Protocol = PPP Acct-Delay-Time = 0 Tue Mar 12 05:03:14 2002: DEBUG: Handling request with Handler 'Realm=DEFAULT' Tue Mar 12 05:03:14 2002: DEBUG: Adding session for macmahon, 202.65.74.17, 33 Tue Mar 12 05:03:14 2002: DEBUG: Handling with Radius::AuthEMERALD Tue Mar 12 05:03:14 2002: DEBUG: Handling accounting with Radius::AuthEMERALD Tue Mar 12 05:03:15 2002: DEBUG: do query is: insert into Calls (UserName, CallDate, AcctStatusType, AcctDelayTime, AcctSessionId, NASIdentifier, NASPort) values ('macmahon', 'Mar 12, 2002 05:03', 1, 0, '000003A0', '202.65.74.17', 33) Tue Mar 12 05:03:15 2002: DEBUG: Accounting accepted Tue Mar 12 05:03:15 2002: DEBUG: Packet dump: *** Sending to 202.65.74.130 port 1646 .... Code: Accounting-Response Identifier: 125 Authentic: ]<133><17><253>Hg<186><207><194>jg<216><248><251><159><227> Attributes: As you can see - the accounting request results in a record inserted into the "Calls" table with the values shown, and an accounting response is then sent back to the client. regards Hugh On Tue, 12 Mar 2002 12:02, Marcel Welschbillig wrote: > Hugh, > > I have attached a debug trace 4 and the radiator config, found it wasn't > the one i sent you earlier but this is the one. > > Thanks in advance ! > > Marcel > > Hugh Irvine wrote: > > Hello Marcel - > > > > Thanks for sending the debug. > > > > It appears that you are sending the radius accounting to 202.65.68.8:1646 > > and the authentication to 202.65.68.8:1645. There is a response from the > > radius server in both cases. > > > > Could you please send me a copy of your configuration file (no secrets) > > together with a trace 4 debug from Radiator showing what is happening. > > > > thanks > > > > Hugh > > > > On Mon, 11 Mar 2002 17:02, Marcel Welschbillig wrote: > >> Hugh, > >> > >> Thanks for the reply. I have attached the config and debug info, i have > >> looked at this for many days and found nothing obvious (my knowlege on > >> radius is limited) and tried many different things and come to no > >> conclusion. If you can see anything wrong please let me know. Also i > >> have removed all filters and access lists on the routers between here > >> and there and had no luck. > >> > >> Regards, > >> > >> Marcel > >> > >> Hugh Irvine wrote: > >>> Hello Marcel - > >>> > >>> It sounds like the 2611 is not configured correctly for radius > >>> accounting. > >>> > >>> You should do a debug on the 2611 to see what it is doing. You might > >>> also check your access lists and filters, as the accounting port number > >>> is different from the authentication port (1645/1812 and 1646/1813). > >>> > >>> regards > >>> > >>> Hugh > >>> > >>> On Mon, 11 Mar 2002 16:31, Marcel Welschbillig wrote: > >>>> Hi, > >>>> > >>>> Was hopping someone can shed some light on our problem, the story goes > >>>> like this..... > >>>> > >>>> We are running radiator with platypus billing system and things are > >>>> working fine on our local ISP system. We recently got into the > >>>> satellite telecommunications business and decided to put a 2611 router > >>>> out on a remote site with an 8AM analog modem module to provide access > >>>> to the data stream and authenticate via radiator/platypus. The data > >>>> stream is via VSAT satellite equipment ( Basicly a serial at both > >>>> routers with VSAT equipment between, using HDSL Encapsulation, > >>>> introduces about 700ms delay round trip ) > >>>> > >>>> The strange thing is that i can seem to authenticate from the remote > >>>> 2611 but there is no call/download information sent back. The radius > >>>> server and platypus server are local and work fine with our other > >>>> access servers. Why can it authenticate over the SAT link but not send > >>>> the billing data back ?? I know the radius server and platypus server > >>>> are configured correctly because they are accounting for our loacl > >>>> dialin customers, the router is configured nearly identical to our > >>>> access servers with regards to CISCO aaa. > >>>> > >>>> Any help would be great, i have tried just about everything and dont > >>>> know where to go next. -- Radiator: the most portable, flexible and configurable RADIUS server anywhere. Available on *NIX, *BSD, Windows 95/98/2000, NT, MacOS X. - Nets: internetwork inventory and management - graphical, extensible, flexible with hardware, software, platform and database independence. === Archive at http://www.open.com.au/archives/radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED]' with 'unsubscribe radiator' in the body of the message.