Hi Anders; This sheds some light ... I think (dimly).
My lens is on your 'lens_fix.xml' list: <lens id="131" min-focal="17" max-focal="70" make="Canon"> <name>Sigma 17-70mm f/2.8-4.5 DC Macro</name> The camera Canon 50D is also on the camera list. So all should work correctly. 1.) Although it is really not important, the 'Lens Editor' should not report the Aperture as f4.2 for the image when it really is f8.0. The aperture is being read directly from the RAW file I would guess. 2.) Since the lens is listed then the Lens correction sliders should work. At one time I am sure (again dimly) that they did function. If this is a case where you need an actual image to solve the problem I can try and get a small JPG to you (if that helps, or must it be a RAW) but I am travelling and on a terrible (worse than dial-up) connection so it may take a few days. David On Fri, 2011-05-27 at 15:01 +0200, Anders Kvist wrote: > Hi David > > Think this is the solution you are looking for :) > > http://rawstudio.org/blog/?p=541 > > /Anders > > > > On 2011-05-27 14:46, David Vincent-Jones wrote: > > Hi Klaus; > > > > Ran through the terminal and all looks clean. No error messages. > > > > Opened the 'Rawstudio Lens Editor' .. didn't look before ... see the > > Editor thinks image was shot at f4.2 .. incorrect it was shot at f8.0. > > In fact the Editor thinks that all of my images were shot at f4.2 > > > > Then looked in the lens library and find my lens is apparently multiply > > installed from f2.8 through f4.5 (in 1/3 increments ?) 10 times but > > nothing beyond that f4.5 aperture. > > > > I was not aware that every differing aperture needed to have a new > > entry. > > > > David > > > > On Fri, 2011-05-27 at 12:37 +0200, Klaus Post wrote: > >> Hi! > >> > >> The temperature will reset to "As Shot" neutral converted through the > >> input profile, so it may vary slightly from the kelvin on your camera, > >> and slightly if you change the profile, but it should give the most > >> accurate representation of the white balance selected on the camera. > >> > >> Are there any lens-related error messages in the console? > >> > >> Regards, Klaus Post > >> > >> http://www.klauspost.com > >> > >> > >> On Fri, May 27, 2011 at 11:01, David Vincent-Jones > >> <[email protected]> wrote: > >> I notice that when I 'reset' the Tint, the Temperature is also > >> reset ... > >> is there a reason? The base Temperature setting of 5650 > >> appears unusual > >> vs. other programs also the setting of 9 for the Tint .. did > >> you have > >> something special in mind? Not problems, only questions! > >> > >> Previously Reported ..I still have a problem with the Lens > >> Correction: > >> I am using a 'Sigma 17-70 mm f/2.8-4.5 DC Macro'. The lens is > >> correctly > >> applied but none of the correction slider functions are > >> working. My lens > >> is correctly listed. (RS 2.0 on Ubuntu 10.10) > >> > >> I am "in the field" at this time and processing substantial > >> image > >> batches on a laptop. Rawstudio is a real life-saver; thank > >> you. > >> > >> David > >> > >> > >> _______________________________________________ > >> Rawstudio-users mailing list > >> [email protected] > >> http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users > >> > >> _______________________________________________ > >> Rawstudio-users mailing list > >> [email protected] > >> http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users > > > > > > _______________________________________________ > > Rawstudio-users mailing list > > [email protected] > > http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users > > > _______________________________________________ > Rawstudio-users mailing list > [email protected] > http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users _______________________________________________ Rawstudio-users mailing list [email protected] http://rawstudio.org/cgi-bin/mailman/listinfo/rawstudio-users
