Whoops, no it's not saving it with the dashes. I think when you convert a
database, it doesn't really modify the way any forms work until you edit and
save a form again using the new version.Patti
On Sunday, December 5, 2021, 03:03:14 PM EST, 'Patti Jakusz' via RBASE-L
<rbase-l@googlegroups.com> wrote:
Hello Javier,I think Jim Belisle solved that issue for me. I must have found
a glitch in Rbase 10 and my formatted data was saved in the table with the
dashes, despite the format mask being wrong. I was using 000\-00\-0000;0; Now
that I'm using 10.5E, it seems to work differently.
But it is still saving the data in the table with the dashes - all 11
characters, which is what I wanted. Now that I'm writing this email, I
realized it's still not working like one would expect, but then things always
ork screwy for me.
Patti
On Sunday, December 5, 2021, 01:17:54 PM EST,
<javier.valen...@vtgonline.com> wrote:
A couple of thoughts about it
First, your code remind me of the time when memory was at a premium and we had
to sue shorthand to save memory and storage; that is no longer the case A while
back, I took the time to rewrite a lot of my old code to adapt to the new
standards and to make it so is legible and easy to follow by any one working on
the code.
I would start by rewriting the code to include the new syntax
IF vssnum IS NULL THEN
SET VAR vCase = NULL
ELSE
SET VAR vCase = CASENUM IN CASEID WHERE SSNUM = .vssnum
ENDIF
I believe R:Style, when properly configure will do a lot of it for you.
Now a couple of question:
Is vssnum defined before the snippet above and if so, how is it defined or is
this the value entered in the form?
Can your TRACE the code and see:
What is the value of vssnum before you hit the first line
If it is not NULL, what is the value of vssnum and vCase before and after you
execute line 4? Is it retrieving the right information for vCase?
This should give you an idea of where the value is changed, at least in the
code provided.
Also, if you are always using just 9 digits for SSN, why do you have the column
defined as being 11 characters?
Javier,
Javier Valencia, PE
913-915-3137
From: 'Patti Jakusz' via RBASE-L <rbase-l@googlegroups.com>
Sent: Saturday, December 4, 2021 11:54 AM
To: rbase-l@googlegroups.com
Subject: Re: [RBASE-L] - X.5E Upgrade woes
I have traced it and watched the variable vssnum. That is how I knew that the
dashes were missing.
I made a mistake in my first email. I set the variable vssnum=SSNum when I
defined variables, and then I used vssnum in my EEP.
I attached a screen snip from the form and my variables, then one from the
formatting of the field, then one of my eep. The eep doesn't work because my
dashes are not in vssnum.
On Saturday, December 4, 2021, 12:24:13 PM EST, 'Jim Belisle' via RBASE-L
<rbase-l@googlegroups.com> wrote:
Patti,
You state in the first question, “I set a variable vss = SSNum in an eep that
is run when you exit the SSNum field”. Could you show me the SET VAR command
for this variable?
Also I would trace your form so you can look at the variable vss and see what
it looks like as you go through the form fields. This way you can see if the
var is correct on the exit EEP and if it is correct, see when it changes.
James Belisle
Making Information Systems People Friendly Since 1990
From: 'Patti Jakusz' via RBASE-L <rbase-l@googlegroups.com>
Sent: Saturday, December 4, 2021 10:55 AM
To: rbase-l@googlegroups.com
Subject: Re: [RBASE-L] - X.5E Upgrade woes
Yes, the de clerk is only entering digits.
No, the table field has no formatting. It is just a text field 11 characters
long. It always worked ok and it still is saved correctly in the table.
In the data-entry form, it displays the number with the formatting, and it
saves it in the table with formatting. But it's in between those events where
it looses the dashes. And in never did in previous versions.
I use SSNum in other parts of the form to look up and plug in other info so
the DE clerk doesn't have to enter it. But it suddently has no dashes until
after we hit save.
On Saturday, December 4, 2021, 11:39:03 AM EST, 'Jim Belisle' via RBASE-L
<rbase-l@googlegroups.com> wrote:
Patti,
Some questions:
- Is the entry person entering the info using just the numerical SS#.
Ex. I enter 123456789 but the form is formatted so it shows 123-45-6789.
- Does the table field where the SS# is saved also have the same format so
the info will always show the numerals with the dashes? Below you will see the
table column (testcompute) is a computed column using the expression that
combines in this instance two columns in the table.
In your table I would think, if the entry person just enters the numerals of
the SS#, the table column in a text field that is also a computed column.
James Belisle
Making Information Systems People Friendly Since 1990
From: 'Patti Jakusz' via RBASE-L <rbase-l@googlegroups.com>
Sent: Saturday, December 4, 2021 9:46 AM
To: rbase-l@googlegroups.com; rbase-l+nore...@googlegroups.com
Subject: Re: [RBASE-L] - X.5E Upgrade woes
| |
CAUTION:This is an EXTERNAL EMAIL, STOP! and think before clicking on any links
or opening attachments.
|
Problem #1 below. It is losing the formatting anytime I use SSNum in the
variable definitions in the whole form. It saves it with the dashes. It
displays it with the dashes, but everywhere else it is without dashes.
Help. I have dozens of forms that use the SSNum as a means for lookups from
another table.
I hope there is a fix.
Patti
On Saturday, December 4, 2021, 10:35:08 AM EST, 'Patti Jakusz' via RBASE-L
<rbase-l@googlegroups.com> wrote:
I need to clarify #2 problem below. It didn't stop in the middle of printing a
report. I ran a command file and I set output filename with screen and had
Echo on. It disconnected in the middle of printing a line in my file. It
disconnect halfway thru printing someone's SS#.
Patti
On Friday, December 3, 2021, 07:34:48 PM EST, 'Patti Jakusz' via RBASE-L
<rbase-l@googlegroups.com> wrote:
Hello Rbase Pros,
We just finally upgraded from Rbase X to X.5 Enterprise and now I have problems.
1) I have forms that have formatted fields, using Input format masks. Our
SSNum has dashes in it and it's stored that way in the database. I have a form
where people enter the data for women referred to our program. SSNum shows up
on the screen with dashes. When I save it in the table it has dashes. But
when I use use it in an eep before saving the record, the dashes are gone.
I set a variable vss = SSNum in an eep that is run when you exit the SSNum
field. This is the point where the dashes disappear. I need to use it for the
next field, which has a pop-up menu using .vss
I know I can fix it by adding more code, but I hate to think of all the places
this might occur. Is this a bug? Does it have a fix? Has anyone else
experienced this? (I know I'm the only person in the world who stores SS# with
dashes, but I do.) This worked fine in all previous versions.
2. We now have a remote server, instead of one on-site. Rbase disconnects
users from the database at random times. It has nothing to do with inactivity.
I've had it disconnect me in the middle of printing a line in a report. It
happens in the middle of data-entry. They enter a bunch of small records.
Then the next record there is no connection to the database. It's crazy. The
server says we are not being dropped. But Rbase says we are.
Anyone else have this problem?
Thank you!!
Patti
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/906679540.2411960.1638577982742%40mail.yahoo.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/605141476.2763414.1638631589311%40mail.yahoo.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/SA0PR02MB743407D26337FAA6BA35A2FFA06B9%40SA0PR02MB7434.namprd02.prod.outlook.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/SA0PR02MB7434D58A12EEE936A7AFFDDFA06B9%40SA0PR02MB7434.namprd02.prod.outlook.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/991830414.2780526.1638640426198%40mail.yahoo.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/!%26!AAAAAAAAAAAYAAAAAAAAAG1gU%2BA71stIig71BAFnx9iihQAAEAAAAJSLg7oNRZpGlQFgUi0LDrEBAAAAAA%3D%3D%40vtgonline.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/2018637820.580298.1638734586435%40mail.yahoo.com.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups
"RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/1643617496.2923263.1638734945371%40mail.yahoo.com.
