John:
Intrigued by (a) it worked before, and (b) your drop-down Increment
observation.
Here's what I get for: Bottom Axis > Scales > Increment > Change:
Hmmm.
Bruce
------ Original Message ------
From "johnd...@gmail.com" <johndoc...@gmail.com>
To "RBASE-L" <rbase-l@googlegroups.com>
Date 7/24/2023 2:29:06 AM
Subject Re: Re[2]: [RBASE-L] - R:CHARTS - Adjusting the Label Increments
on a DateTime X Axis
Hi Bruce,
I have tried various things as suggested. and more, including just
having one series, but the only control that I can get to adjust the
label spacing is the minimum separation. Not sure what is awry here as
I have managed to get this to work previously.
Thanks for your help.
Regards
John Docherty
On Monday, July 24, 2023 at 6:14:42 PM UTC+12 johnd...@gmail.com wrote:
Hi Bruce,
Thanks very much for taking the time to reply. I am just back home so
I will look at this tonight. To answer your questions though:-
1. The data is from three tables with different time stamps. I can
force the start time to be the same as this is just one day's data.
The sampling interval differs. Not ideal but one set of data
(pressure) was sampled at a higher rate than the temperatures.
2. The two hours came from a drop down list.
I will let you know how I get on.
Thanks again.
Regards
John Docherty
On Monday, July 24, 2023 at 8:29:25 AM UTC+12 Bruce Chitiea wrote:
John:
It's been a while since I've standardized my axis' configs, rusty now
on charting anomalies.
First the data.
(1) Date/Time is captured in 1/100th second intervals, with values
presumably recorded in each of the three tables; sourced from a
family of sensors performing a whole lot of sampling. Do discrete
data points in each of the three tables align upon a common date/time
value, e.g. all three tables have a data point containing dateTime
value 08/06/2023 03:09:03.03? (meaning they share a common Label
value. If not, there's a View trick to overcome the anarchy for
charting purposes.)
(2) Do all three series share the same horizontal spatial
configurations of the series chosen for labels?
(3) How does R:Charts recognize the Scale Increment text value "Two
Hours"?
(4) My experience of axis configuration is similar to yours. The
frequency and spacing of Labels seems to depend on the frequency and
spacing of Tick Marks. I can't say I know everything about that. But
note the variance of minor/major Tick Mark spacing along the axis.
The spacing of the minor ticks in the first and sixth segments is
reduced relative to those within the second through fifth segment,
suggesting a "crowding" . Take a shot at standardizing the spacing:
-- Chart Editor > Chart > Axis > Bottom Axis >
-- Ticks Tab: Reduce the "Minor" Count to = 1 (or 0, as the Minor
Ticks aren't very useful here)
-- Labels Tab > Styles Sub-Tab: Play with the "Min. Separation %"
value
(5) Thinking, too, that the width of each dateTime value may be a
factor. Granted, your Labels Tab > Style Sub-Tab > [x] Multi-line
staggers the Labels; but note the uniformity of the vertical margin
spacing between the top and bottom row. You may be "minned out" for
horizontal adjustment. Perhaps redefining your Label value solely as
a Time data type might provide lateral flexibility?
Hope there's something there for you.
Best, Bruce
Bruce A. Chitiea | SafeSectors, Inc.
112 Harvard Ave #272 | Claremont CA 91711-4716 | USA
+011 (909) 238-9012 <tel:(909)%20238-9012> m | rby...@safesectors.com
------ Original Message ------
From "johnd...@gmail.com" <johnd...@gmail.com>
To "RBASE-L" <rba...@googlegroups.com>
Date 7/23/2023 11:58:26 AM
Subject Re: [RBASE-L] - R:CHARTS - Adjusting the Label Increments on
a DateTime X Axis
Bruce,
Thanks for your reply. I have attached two pdfs, one showing the
settings I am using and the other the resultant graph. Changing the
settings seems no have no effect on the labels so presumably I am
doing something wrong. The data is being plotted from three tables
with differing datetime values.
Any suggestions that you have would be much appreciated.
Thank you.
Regards
John Docherty
On Monday, July 24, 2023 at 2:12:53 AM UTC+12 Bruce Chitiea wrote:
John:
Please send a screenshot or PDF of the challenge.
Bruce
Bruce A. Chitiea | SafeSectors, Inc.
112 Harvard Ave #272 | Claremont CA 91711-4716 | USA
+011 (909) 238-9012 <tel:(909)%20238-9012> m |
rby...@safesectors.com
------ Original Message ------
From "johnd...@gmail.com" <johnd...@gmail.com>
To "RBASE-L" <rba...@googlegroups.com>
Date 7/23/2023 3:53:37 AM
Subject [RBASE-L] - R:CHARTS - Adjusting the Label Increments on a
DateTime X Axis
Hi,
I am having difficulty setting the increments between labels /
gridlines on a X Axis which consists of datetime values. While I
have managed to get this to work properly in the past I have had
no success with the current data. If anyone can tell me how to set
the increment to say 2 hours that would be greatly appreciated.
(Even if I try to use the 'standard' intervals from the drop-down
list that does not change the labels or their spacing. Presumably
I am doing something wrong, but I am not sure what that is....)
Thanks.
Regards
John Docherty
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to rbase-l+u...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/7d9b5ed1-860b-4a19-8e6b-b80be7308c5an%40googlegroups.com
<https://groups.google.com/d/msgid/rbase-l/7d9b5ed1-860b-4a19-8e6b-b80be7308c5an%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to rbase-l+u...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/891d53e0-b957-41aa-874a-903162e6d383n%40googlegroups.com
<https://groups.google.com/d/msgid/rbase-l/891d53e0-b957-41aa-874a-903162e6d383n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google
Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/546f92f6-a970-4ed8-930b-a5e80cea001fn%40googlegroups.com
<https://groups.google.com/d/msgid/rbase-l/546f92f6-a970-4ed8-930b-a5e80cea001fn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
For group guidelines, visit
http://www.rbase.com/support/usersgroup_guidelines.php
---
You received this message because you are subscribed to the Google Groups "RBASE-L" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbase-l+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbase-l/emdcff6889-038e-4954-acd5-696649a7ad39%40b6fc8f9c.com.