Razzak:
I have Rbase 7.5 installed on the server
RFax.RBL is in the RBG75 Directory
Each workstation dumps its outgoing fax information into FaxTable
FaxTimer runs on the server
We are using the faxtimer to check that table and send faxes.
Installed Rfax, the fax settings seem to be fine.
We are also running a generic fax program to receive faxes, and that works
fine.
Dick
A. Razzak Memon wrote:
Dick,
How are you planning to run R:Fax from the Windows 2003 Server?
Is that a place where you will be using the PLUGIN RFax.RBL command?
Is that a place where R:BASE 7.x or R:BASE Turbo V-8 is installed?
Technically, you may share the fax device on the network. However,
you must install (RFax.RBL) and configure the R:Fax settings on the
workstation running and/or initiating the PLUGIN RFax.RBL command.
Depending on the R:Fax licensing, you may also place the RFax.RBL
Plugin in RBG7.EXE, RBG75.EXE, RBG76.EXE or RBG8.EXE directory, on
each workstation running your application. This approach will
simplify using the RFax.RBL Plugin without specifying the location
and path.
Hope that explains!
Very Best R:egards,
Razzak.
